APC
A backup power supply with surge protection for computers and electronic devices
The
APC Back-UPS 2200VA AVR FR line-interactive UPS provides temporary battery power in case of a power failure. In addition, it has a battery failure analysis function with early warning, enabling preventive maintenance to be carried out in good time. With the
APC Back-UPS 2200VA AVR UPS, you can effectively protect your equipment and data in the event of a power failure or surge. This powerful and affordable model will be an ideal purchase for the protection of a desktop computer and its main peripherals.
Features :
- Automatic voltage regulation: Raises low voltages and lowers high voltages to levels suitable for your equipment automatically.
- Protection of connected equipment against data line surges
- Indicators that allow easy reading of the status of the mains power, UPS and battery.
- Operating System Compatibility of PowerChute Personal Edition: This software supports many operating systems and processors.
- Battery and Surge Protection Outputs Only: Reserves power capacity and uptime for connected equipment that requires battery backup, while limiting surge protection for less critical equipment
- Status Light Display: Quickly identify unit and power status with visual indicators.
- Audible alarms: Notify of changing mains and UPS conditions.
- Intelligent battery management: Maximises battery performance, life and reliability through an intelligent precision charging process.
- Battery Failure Notification: Provides battery failure analysis with early warning, enabling timely preventive maintenance
- Automatic self-test: Battery self-test is performed periodically to ensure early detection of the need for battery replacement.
- Safety Board Approved: Ensures that the product has been tested and approved as safe to operate with the connected loads and within the environment.
- Surge Protected Battery and Outlets: Back up and protect your equipment and data in the event of power outages, surges or spikes.
- Surge outlets only: Protect your secondary electronics from power surges and spikes, without diminishing the battery power used to operate primary electronics during a power outage.
Main features:
- Line-interactive UPS
- Output power capacity: 1200Watts / 2200 VA
- Output connections: (4) CEE7 female (FR) (Backup batteries)
- Nominal Output Voltage: 230V
- Nominal Input Voltage: 230V
- Input connection type: CEE7 male
- Cord Length: 1.2 metres
- Output frequency (mains sync): 50/60 Hz +/- 1 Hz Sync to mains
- Waveform type: Approximate sine wave
- Transfer time : 6 ms typical (10 ms maximum)
- Input frequency: 50/60 Hz +/- 5 Hz
- Input voltage range for mains connection: 140 - 300V
- Input power factor at full load: 0.63
- Battery type: Sealed lead acid battery
- Typical recharge time: 8 hour(s)
- Expected battery life (years): 1 - 2
- Interface Port(s): USB
- Control Panel: On-line or battery status indicator
- Audible alarm: Alarm when switching to battery mode; separate low battery alarm
- Over-current energy rating: 273Joules
- 10/100/1000 Base-T RJ45 Ethernet protection
- Audible noise at 1 metre from the surface of the unit: 40.0dBA
- Protection class: IP20
- Dimensions : W x H x D): 140 x 190 x 390 mm
- Net weight: 12.3 kg
- Colour: Black
- Standard warranty: 2 years, repair or replacement
Logistics information :
This product is available in the following locations: France, Belgium, Luxembourg, Switzerland, Spain, Italy, Monaco.
