APC Back-UPS 2200VA, 230V, AVR, IEC

Line-interactive inverter 2200 VA / 230 V

Pictures may differ from actual products

The APC Back-UPS 2200VA AVR line-interactive UPS provides temporary battery power in case of a power failure. In addition, it has a battery failure analysis function with early warning, allowing preventive maintenance to be carried out in good time.

Line-interactive inverter 2200 VA / 230 V

Overview

A backup power supply with surge protection for computers and electronic devices


The APC Back-UPS 2200VA AVR IEC line-interactive UPS provides temporary battery power in case of a power failure. In addition, it has a battery failure analysis function with early warning, allowing preventive maintenance to be carried out in good time. With the APC Back-UPS 2200VA AVR UPS, you can effectively protect your equipment and data in the event of a power failure or surge. This powerful and affordable model will be an ideal purchase for the protection of a desktop computer and its main peripherals.

Features :
  • Automatic voltage regulation: Raises low voltages and lowers high voltages to levels suitable for your equipment automatically.
  • Protection of connected equipment against data line surges
  • Indicators that allow easy reading of the status of the mains power, UPS and battery.
  • Operating System Compatibility of PowerChute Personal Edition: This software supports many operating systems and processors.
  • Battery and Surge Protection Outputs Only: Reserves power capacity and uptime for connected equipment that requires battery backup, while limiting surge protection for less critical equipment
  • Status Light Display: Quickly identify unit and power status with visual indicators.
  • Audible alarms: Notify of changing mains and UPS conditions.
  • Intelligent battery management: Maximises battery performance, life and reliability through an intelligent precision charging process.
  • Battery Failure Notification: Provides battery failure analysis with early warning, enabling timely preventive maintenance
  • Automatic self-test: Battery self-test is performed periodically to ensure early detection of the need for battery replacement.
  • Safety Board Approved: Ensures that the product has been tested and approved as safe to operate with the connected loads and within the environment.
  • Surge Protected Battery and Outlets: Back up and protect your equipment and data in the event of power outages, surges or spikes.
  • Surge outlets only: Protect your secondary electronics from power surges and spikes, without diminishing the battery power used to operate primary electronics during a power outage.

Main features:
  • Line-interactive UPS
  • Output power capacity: 1200Watts / 2200 VA
  • Output connections: (6) IEC 60320 C13 (Battery backup)
  • Rated output voltage: 230V
  • Input Voltage Rating: 230V
  • Input connection type: IEC 60320 C14
  • Cord Length: 1.2 metres
  • Output frequency (mains sync): 50/60 Hz +/- 1 Hz Sync to mains
  • Waveform type: Approximate sine wave
  • Transfer time : 6 ms typical (10 ms maximum)
  • Input frequency: 50/60 Hz +/- 5 Hz
  • Input voltage range for mains connection: 140 - 300V
  • Input power factor at full load: 0.63
  • Battery type: Sealed lead acid battery
  • Typical recharge time: 8 hour(s)
  • Expected battery life (years): 1 - 2
  • Interface Port(s): USB
  • Control Panel: On-line or battery status indicator
  • Audible alarm: Alarm when switching to battery mode; separate low battery alarm
  • Over-current energy rating: 273Joules
  • 10/100/1000 Base-T RJ45 Ethernet protection
  • Audible noise at 1 metre from the surface of the unit: 40.0dBA
  • Protection class: IP20
  • Dimensions : W x H x D): 140 x 190 x 390 mm
  • Net weight: 12.3 kg
  • Colour: Black
  • Standard warranty: 2 years, repair or replacement
Logistics information : This product is available in the following locations: France, Belgium, Luxembourg, Switzerland, Spain, Italy, Monaco.
Specifications
Select your criteria

General information

Product name

APC Back-UPS 2200VA, 230V, AVR, IEC

Brand

APC

Model

BX2200MI

Main characteristics

Technology

Line Interactive

Type of product to protect

Workstation
Personal PC / Hi-Fi installation

Inverter power (VA)

2200 VA

Inverter power (W)

1200 W

Scalable

No

Manageable

No

Connectivity

Number of sockets

6

Connector(s)

6 X IEC C13
RJ45 Female

Physical characteristics

Power inverter format

Tower

Width

140 mm

Length

190 mm

Thickness

390 mm

Weight

12.3 kg

Warranties

Commercial warranty

Seller 3 years

Legal warranty

See terms & conditions

Product referenced on 8 Feb 2021

Customer review

For the moment, there are no customer reviews.Write a review