Doubts
I've been building my own PCs and those of my family since the last century. I chose this motherboard for a mid-range PC.
But with Corsair VENGEANCE® LPX 32 GB (2 x 16 GB) DDR4 DRAM 3600MHz if I use the ports for Dual channel I have no image (monitor remains off), the rtx4070 is like inactive.
If I put them on the 2 ports closest to the cpu I get the image and the pc works with the 32GB (but in single channel).
These memory sticks are not on the "supported" list, but I've never had any problems with an Intel configuration (a Ryzen 2600 had a hard time with old 3200 memory sticks (they work, but not as fast), but no problems with my 5900x).
Here, either I've got a problem with the 2 furthest ports on the cpu, or the motherboard is configuring them incorrectly, or there's a problem with the sticks?
I've updated the bios to the latest without any result on the dual channel side. I've tried to set the voltage to the required voltage in XMP mode but adding/moving a strip resets it to 1.2V but that should be enough at 2133MHZ which also resets itself.
If you choose this motherboard, be sure to follow the list of compatible memories. (At least avoid the Corsairs I've used).