Pictures may differ from actual products
The Netgear WAX625 access point features Dual-Band Wi-Fi 6 AX5400 (4800 + 600) and a 2.5 Gbps LAN connector to take your business wireless installation to the next level, offering greater fluidity even with an ever-increasing number of users. This system is Wi-Fi MESH, MU-MIMO and Beamforming compatible, so you can be sure of a stable, powerful and fluid connection. Security is state-of-the-art thanks to its compatibility with the WPA3 standard.
Select your criteria
General information |
Product name |
Netgear WAX625 (WAX625-100EUS) |
Brand |
Netgear | |
Model |
WAX625-100EUS | |
Technical specifications |
Transfer rate |
5400 Mbit/s |
Wi-Fi standard |
Wifi 6 AX | |
Network standard(s) |
2.5 Gbps Gigabit Ethernet (2.5 GbE) | |
| Wi-Fi 6 AX | ||
| Wi-Fi A (IEEE 802.11a) | ||
| Wi-Fi AC | ||
| Wi-Fi B (IEEE 802.11b) | ||
| Wi-Fi G (IEEE 802.11g) | ||
| Wi-Fi N (IEEE 802.11n) | ||
| 100/1000 Mbps | ||
| Wi-Fi 6 AX 5400 (IEEE 802.11ax) | ||
Mesh Wi-Fi (mesh/multiroom network) |
Yes | |
Dual-Band |
Yes | |
Connector(s) |
1 X 2.5 Gigabit Ethernet - RJ45 Female | |
| 1 X Gigabit Ethernet - RJ45 Female | ||
PoE (Power over Ethernet) |
Yes | |
Use |
Indoor | |
Operating mode |
Access point | |
| Point to multipoint | ||
| Point to point | ||
IPv6 compatible |
Yes | |
Encryption |
WPA | |
| WPA2 | ||
| WPA3 | ||
MU-MIMO compatible |
Yes | |
Number of Multi-SSID |
8 | |
Removable antenna(s) |
No | |
Color |
White | |
Width |
239.6 mm | |
Height |
241.15 mm | |
Depth |
51.38 mm | |
Weight |
819 g | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
|
|
Safety Information |
Responsible person |
Netgear International, Ltd. |
Postal address |
Sixth Floor T23 YY09 Cork, IE | |
Electronic Address |
Click here
|
See all Netgear products
Product referenced on 26 Oct 2022
The product is exactly what I was looking for, and I would recommend your company for its quality and delivery times.
Thierry
Completely in line with my expectations: A high-performance WiFi 6, with better coverage than my old Netgear WAC124, while keeping power consumption under control (~15W). The data rate measured in 5GHz near the AP is 800Mbs and remains at over 400Mbs overall in the house.
To take full advantage of PoE, this access point should be connected to a PoE++ (802.3bt) switch. On a PoE+ (802.3at) switch, the access point works in degraded mode and the data rates are limited. The power adapter is sold separately. But in my case, as I'm still on Wi-Fi 5, plugged in or not on the mains, it doesn't seem to make much difference.
As far as functionality is concerned, it meets my expectations: each SSID is associated with a VLAN and the administration interface can be set to a dedicated VLAN. But when you change settings, they are VERY slow to take effect (sometimes it takes several minutes!).
