Generic
For cleaning and finishing your 3D printed parts
Isopropyl alcohol (or IPA) is a
liquid chemical compound that is essential for all your 3D prints. It is used to
clean resin printed parts and to clean up any resin overflow. SLA parts are rinsed by immersing them in an isopropyl alcohol bath. This bath dissolves the uncured parts to obtain a clean part for the further solidification process. A
drying period
of at least 30 minutes is recommended before post-processing can take place.
Characteristics :
- Solvent IPA isopropyl alcohol
- Purity : 99%.
- Packaging : 1L bottle
- Use : 3D printing finishing
- Drying period after use : 30 min
- Keep away from flames
- Use in a ventilated area
Information provided by our tech department
IPA 99% is a hazardous chemical and must be used in strict accordance with safety regulations. Protective glasses and gloves must be worn. Keep away from flames and use in a ventilated area.