Pictures may differ from actual products
The Zalman i3 case will accommodate an ATX, Micro-ATX or Mini-ITX configuration with a 360 mm long graphics card. This mid-tower case with acrylic window will be an ideal purchase to assemble a high-performance configuration, focused on gaming and multimedia. The case is designed for maximum heat dissipation and quiet operation.
Designed to optimise the performance of your components, the Zalman i3 case is also very practical, both for maintenance operations and for everyday use! On the top of the case, you will have access to expansion ports with USB 2.0 and 3.0 ports as well as audio connectivity and fan control. The acrylic side window will allow you to keep an eye on your configuration illuminated by the white LEDs of the fans.
Several cleverly placed filters on the case keep dust out. A tool-free hard drive mounting system makes it easy to install or remove drives. Finally, the rounded edges of the case allow for safer maintenance without the risk of injuring fingers.
Up to 6 x 120mm fans can be installed in the Zalman i3 case; 4 fans are already supplied with white LED lighting. This Zalman case offers excellent cooling potential.
Designed to accommodate a high-performance configuration, the Zalman i3 case offers a large interior space for the installation of all your computer components. With no less than 2 3.5" bays, 3 2.5" bays and 7 PCI slots.
Select your criteria
General information |
Product name |
Zalman i3 |
Brand |
Zalman | |
Model |
I3 | |
Main characteristics |
Graphic card max. length |
360 mm |
Max height CPU fan |
156 mm | |
Power supply max. length |
180 mm | |
Power format |
ATX/EPS | |
Case format |
Mid tower | |
Use |
Gamer | |
Material |
Steel | |
| Acrylic | ||
Motherboard format |
ATX | |
| Micro ATX | ||
| Mini ITX | ||
Power supply supplied |
No | |
Design |
Screwless fixing system |
Yes |
Case color |
Black | |
Front color |
Black | |
Glass |
Yes | |
Tempered glass |
No | |
LED RGB |
Yes | |
ARGB LED |
No | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
7 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
2 | |
Number of 2.5" slots |
3 | |
Number of 2.5"/3.5" slots |
0 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Top |
Connector(s) available |
1 X USB 3.0 | |
| 2 X USB 2.0 | ||
| 1 X Microphone (3.5mm Jack Female) | ||
| 1 X Headphone (3.5mm Jack Female) | ||
Cooling |
Number of rear fan(s) slots |
1 X 120mm |
Quantity of rear fan(s) supplied |
1 | |
Number of front fan(s) slots |
3 X 120mm | |
Quantity of front fan(s) supplied |
3 | |
Number of above fan(s) slots |
2 X 120mm | |
Quantity of above fan(s) supplied |
0 | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
| 240mm radiator | ||
Front AIO slot(s) |
120mm radiator | |
| 240mm radiator | ||
Physical characteristics |
Width |
196 mm |
Height |
456 mm | |
Depth |
445 mm | |
Weight |
4.7 kg | |
Volume |
39.8 l | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
|
See all Zalman products
Product referenced on 16 Oct 2018
Very good case. Plenty of space for everything. Very simple cable management and the screws are really practical. I'd recommend it. The glass does tend to scratch very easily, but for the price, you shouldn't expect too much either.
This box is pretty good for the price, but for around twenty euros more you can get a much better quality product.
I was looking for a low cost housing for my new setup, and the Zalman I3 fits the bill perfectly. The case is well thought out. However, for watercooling, it will have to be installed on the front. Cable management is easy and the tower is well ventilated with its numerous fans. The speed of the fans can be adjusted directly on the tower by pressing the + or - buttons.
Be very careful with the transparent plastic plate: it scratches easily!
Acquisition of this case for a new configuration. Aesthetically beautiful with its 3 fans in front.
I took 2 stars off because my tower was stuck at the top, which made it difficult to install my motherboard. I had to straighten it without blowing out the rivets. One star less due to the fact that there was no passage for the CPU cables (I had two more); I had to pass the cables over the motherboard. Otherwise, the rest of the cables were well managed.
I'm not a fan of RGB, but the adjustable white LEDs on the fans and the glass make it easy to see when the PC is switched on. The case is quite light compared to my old one, I've already used it for several LANs.
The tower is beautiful.
Fan control on the three level decu with the LEDs increasing in speed.
The ventilation of the tower works quite well.
The plexi on the side is touching my two power supplies of my rx6600xt, it's a shame
I'm not sure if it's a good idea to use the same power supply as the one on the other side of the tower, but I'm sure it's a good idea to use the same power supply as the one on the other side of the tower.
I'm not sure if it's a good one or not, but I'm sure it's a good one.
Very happy with the case. The fans do the job and are quite quiet despite everything.
I have only one complaint, the cable routing is not optimal at all, especially for the rear fan cable. I had to unplug it and put it directly on the motherboard because the motherboard blocks the cable passages.
Very good product I took this case for me silk less heavy following problem of cervical my big tower must too heavy therefore more practical for me it is very pretty except the lights that of the white my question ventilo it melts not of all noise as certain says it the most that I hear it are my ventilo of the graphic card and the proc that I control their speed which turns to bottom if not it is very well
The case is good overall but I find the fans a bit too noisy and a bit too expensive for plexiglass.
Otherwise the assembly is quite easy in this case
Bought this case to replace the aging Antec Nine Hundrer. The strong points are storage for cables to make a clean assembly, ventilation (4 fans quite quiet), quality/price ratio. The only drawback is that the plexiglass on the side is just a piece of plexiglass with holes in it, which makes the case look a bit cheap. I would have preferred a real panel with an integrated plexi. Apart from that, I'm happy with my choice.
Trending now: Gaming PC case | Mini PC case | Media Center case | Server case | Transparent PC case | Fish tank PC case | White PC case | RGB PC case | ATX PC case | E-ATX PC case | Mini ITX PC case | Micro ATX PC case | Mini tower PC case | Mid tower PC case | Full tower PC case | Desktop PC case | Water cooling PC case
