Interesting concept, but poor structure
I chose this product for the concept of having two graphics cards installed vertically on top of each other to avoid overheating. But:
- for two cards you need a second very long panel to move the second card, the passage will be in front of the CPU so not good
- forget the glass panel on the graphics card side, much too close to the cards, it heats up +15-20° and the air does not circulate
- without the glass panel on the side, the graphics cards are well ventilated and the fact of being one on the other vertically is a real plus compared to horizontally where the cards touch each other
The structure of the case looks good (but for me a case should be functional, I don't care about the aesthetics)
- I installed 3 noctua 120mm fans
- the management cable is not bad
- the hard drives are in front and allow to be cooled
- no reset button
- motherboard upside down, not practical for mounting and impossible to do a reverse mount with the graphics cards
- no bracket system, so if you have PCI cards for sound, wifi, network or other, you will not be able to install them
- the fins on the side are not completely fixed, so be careful not to get caught
- it would have been nice to have a grid system instead of glass panels
- the screws for the panels are of poor quality, I didn't tighten them very much and broke one
- I have an AIO corsair H110i watercooling, the installation was a disaster (except if the motherboard could be put in place), as the CPU is at the bottom and the radiator at the top (impossible to install in front) the pipes of a medium length pulls to death, I had to put flex clamps to bring the pipes closer to the structure because the glass panel prevents from "closing" the case
I need to mount the boards vertically on top of each other, but if I had to do it again, I wouldn't take this box.
