Pictures may differ from actual products
DJI Romo A2
Robot vacuum cleaner - Base station with water tank version - sweeping and mopping mode - 36,000 Pa suction power - 2.4 L dustbin - 4 L water tank
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
Powerful, precise and largely automated cleaning
Inspired by the detection and mechatronics technologies developed by DJI for its drones, the DJI ROMO A2 turns daily floor maintenance into a truly autonomous experience. Its maximum suction power of 36,000 Pa effectively dislodges embedded dust, particularly from carpets, while its mopping system adapts in real time to the type of dirt. Thanks to artificial intelligence, it recognizes different situations—dense dust, hair, particles likely to disperse or spilled liquids—and automatically adjusts its route, speed, brush action and suction power. Its LiDAR-guided robotic arm precisely reaches edges, corners and spaces under furniture, while its robotic legs overcome obstacles up to 8.5 cm. After each cycle, its base station takes over: high-temperature mop washing, drying, waste suction and automated maintenance of the washing board.
Technologies inspired by DJI drones
The ROMO A2 combines 3D LiDAR ToF, dual fisheye vision sensors, an upper anti-collision sensor and intelligent algorithms to detect obstacles with millimetric precision. It can detect cables as little as 2 mm thick, identify certain transparent objects and continue operating in reduced brightness. Its auxiliary lamp illuminates up to 2,000 cm² to reveal dust in dark areas. The DualSweep system coordinates the side brushes and roller brushes to better channel hair and fibers, with a reported 0% tangling rate during DJI laboratory tests. Its self-cleaning station uses a nanocrystalline washing board, four high-pressure water jets and a 16 mm waste suction opening. The system is rounded out by advanced noise reduction, 55 W fast charging and the DJI Home app, which allows users to view maps, adjust cleaning strategies and use the integrated camera for remote video calls.
Main features:
- Smart robot vacuum and mop with base station and water tank
- Automatic adaptation to multiple cleaning scenarios using artificial intelligence
- Recognition and differentiated treatment of dust, particles, hair and spilled liquids
- Maximum suction power: 36,000 Pa
- Automatic suction boost on carpets
- Pressure plate creating a semi-sealed seal with carpets to extract embedded dust
- Spilled-liquid cleaning using a dedicated sequence to limit the spread of dirt
- Automatic “Vacuum then mop” mode when a large amount of dust is present
- Automatic slowdown and reduced side-brush rotation when encountering debris that is easy to disperse
- Adaptive LiDAR-guided robotic arm
- Robotic arm range of motion: 123°
- 7.8 cm greater reach than the previous generation
- Cleaning up to 4.5 cm deeper under suspended furniture
- 100% coverage along straight walls, under the conditions specified by DJI
- Cleaning edges, right-angled corners, underneath low furniture and around chair legs
- Detection system including 3D LiDAR ToF sensors
- Two fisheye vision sensors / Additional LiDAR integrated into the robotic arm / Anti-collision sensor located on top of the robot / Millimeter-precise obstacle detection
- Detection of cables up to 2 mm thick
- Recognition of certain transparent objects over 6 cm high / Obstacle avoidance even in low brightness
- Integrated dust-revealing light
- Average area illuminated by the auxiliary lamp: 2,000 cm²
- Clearing a single-level obstacle up to 4 cm / Clearing a two-level obstacle up to 8.5 cm
- Intelligent planning of the return route to the station
- DualSweep cleaning design
- Two side brushes sweeping before the mops pass / Double-row bristle side brushes
- 120° wide-angle bristles
- High-temperature self-cleaning base station
- Advertised operation for up to 365 days without washing-board maintenance, according to DJI laboratory conditions
- Washing board with a nanocrystalline surface that limits stain buildup
- Four high-pressure water jets
- Mop washing with a heating element reaching up to 80 °C / Mop drying at 60 °C
- High-temperature drying of the robot’s dustbin
- UV illumination of the dust bag
- High-efficiency filter
- Fast charging: 55 W / Full charge advertised in approximately 2 h 30 min
- DJI Home control app
- Integrated camera
- Remote video calls
- DJI ROMO A2 robot x 1
- DJI ROMO A2 station with water tanks x 1
- station base plate x 1
- AC power cable x 1
- ROMO cleaning solution x 1
- roller brush with bristles and rubber x 1
Select your criteria
General information |
Product name |
DJI Romo A2 |
Brand |
DJI | |
Model |
CP.CR.00000090.01 | |
Operation |
Product type |
Robot vacuum and mop |
Smart |
Yes | |
Special animals |
No | |
Navigation mode |
Map navigation | |
Back to base |
Yes | |
Technical details |
Sound level |
Normal (> 70 dB) |
Dust container capacity |
Small (< 0.3 L) | |
Dust container capacity |
215 ml | |
Physical characteristics |
Colour |
White |
Repairability index (out of 10) |
8 | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
|
|
Safety Information |
Responsible person |
DJI GmbH |
Postal address |
Industriestrasse 12 97618 Niederlauer Deutschland | |
Electronic Address |
support.eu@dji.com |
See all DJI products
Product referenced on 3 Sep 2026
For the moment, there are no customer reviews.Write a review
In the same universe: romo