Pictures may differ from actual products
Opt for a practical and powerful Mini Tower case with the Xigmatek Nemesis M. Dedicated to gaming, it will house your Mini-ATX configuration with brio thanks to its numerous fan slots (6 x 120 mm) and its watercooling compatibility. With its sober and modern black silhouette, it will easily fit in your gaming space, especially since it has a tempered glass side window.
With the Nemesis M as the basis for your Mini-ATX gaming setup, you can be sure that your PC will be able to fully express its potential. The interior space allows for a 290mm long graphics card and a maximum 160mm fan, and 6 x 120mm fan slots will be perfect for keeping your machine cool. If you prefer liquid cooling, you can opt for watercooling with a maximum 240mm radiator, ideal for customisation.
Two storage bays are also available, two 3.5" and two 2.5", to keep your favourite content ready to use.
Select your criteria
General information |
Product name |
Xigmatek Nemesis M |
Brand |
Xigmatek | |
Model |
EN43736 | |
Main characteristics |
Graphic card max. length |
290 mm |
Max height CPU fan |
160 mm | |
Power supply max. length |
160 mm | |
Power format |
ATX/EPS | |
Case format |
Mini tower | |
Use |
Gamer | |
Material |
Steel | |
| PVC | ||
| Tempered glass | ||
Motherboard format |
Micro ATX | |
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
Black | |
Front color |
Black | |
Dust filters |
1 | |
Glass |
Yes | |
LED RGB |
No | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
4 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
2 | |
Number of 2.5" slots |
2 | |
Number of 2.5"/3.5" slots |
0 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Top |
Connector(s) available |
2 X USB 2.0 | |
| 1 X USB 3.0 | ||
| 1 X Headphone (3.5mm Jack Female) | ||
| 1 X Microphone (3.5mm Jack Female) | ||
Cooling |
Number of rear fan(s) slots |
1 X 120mm |
Quantity of rear fan(s) supplied |
1 | |
Number of front fan(s) slots |
3 X 120mm | |
Quantity of front fan(s) supplied |
2 | |
Quantity of side fan(s) supplied |
0 | |
Number of above fan(s) slots |
2 X 120mm | |
Quantity of above fan(s) supplied |
0 | |
Quantity of underneath fan(s) supplied |
0 | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
| 240mm radiator | ||
Physical characteristics |
Width |
185 mm |
Height |
390 mm | |
Depth |
370 mm | |
Volume |
26.69 l | |
Warranties |
Commercial warranty |
Seller 2 years |
Legal warranty |
See terms & conditions |
See all Xigmatek products
Product referenced on 9 Dec 2019
The tower is simple and compact, just as I wanted it to be.
The ventilation works perfectly.
It is not a "silent" tower but the noise is quite usual and not disturbing.
The finishing touches are not so good.
The finishes are average. The fans will have to be changed to reduce the noise... Finally there is only the price and still with this quality there is less expensive.
+
Lightweight case, tempered glass
-
Fans in MOLEX, Finishes can be improved
g e n i a l super good box delivery hyper fast hot almost not in session of eju of more cde 2 hers
I was looking for an affordable case for a low budget computer that would stay in a corner, this case fits perfectly, however the fans are not the most discrete. I only plugged in the one at the back because I don't use the machine very much, but it still makes more noise than other cases.
The case is well finished with 3 original fans (to be connected to your power supply and quite noisy but they are there and they help). space for 2 ssd in the back of the case and 52 hdd at the level of the power supply cover (it's a pain to install but not impossible). the space for the CG is just right and leaves little space for air but it's still viable
I'm not sure if it's a good idea for a small configuration that doesn't heat up much.
small
3 fans included
serious manufacturing
I don't put 10/10 because we can always do better.
Good compact case for a home-made configuration, but the screws for the CM are not of great quality: 2 screw threads screwed up during assembly without having forced them. Mounting a ryzen 7 and a rx 590 without any problem with a pretty good management cable. The cooling is good with the 3 original fans, CPU at 65 degrees at max load and GPU at 75 degrees at max load. Aesthetically, the tempered glass is nice, but the thickness of the glass screws is not counted in the width of the case; count 5-7mm more than on the card. I am satisfied with this case, it is a good value for money, and one of the smallest cases available.
Trending now: Gaming PC case | Mini PC case | Media Center case | Server case | Transparent PC case | White PC case | RGB PC case | ATX PC case | E-ATX PC case | Mini ITX PC case | Micro ATX PC case | Mini tower PC case | Mid tower PC case | Full tower PC case | Desktop PC case | Water cooling PC case
