Pictures may differ from actual products
Select your criteria
General information |
Product name |
G.Skill RipJaws 5 Series Red 16GB (2x8GB) DDR4 3600MHz CL19 |
Brand |
G.Skill | |
Model |
F4-3600C19D-16GVRB | |
Memory format |
Typical use |
Desktop computer |
Memory type |
DDR4 | |
Memory format |
DIMM 288-pin (DDR4) | |
Memory |
Capacity |
16 GB |
Memory Frequency(ies) |
DDR4 3600 MHz | |
Memory standard |
PC4-28800 | |
Memory specification |
Unbuffered | |
Number of modules |
2 | |
Capacity per module |
8 GB | |
LED |
No | |
LED RGB |
No | |
Cooling |
Radiator |
Yes |
Radiator color |
Red | |
Fan supplied |
No | |
Timings |
CAS Latency |
19 |
RAS to CAS Delay |
20 | |
RAS Precharge Time |
20 | |
RAS Active Time |
40 | |
These timings are supported with a minimum voltage of: |
1.35 Volt(s) | |
Voltage |
1.35 Volts | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all G.Skill products
Product referenced on 18 Apr 2018
Very good memory, easy to configure and keeps its promises. I'm not sure if it's a good idea to use a MSI Z390-A PRO, but I'm not sure if it's a good idea to use a MSI Z390-A PRO, or a MSI Z390-A PRO.
I'm sorry that one of the two memory sticks doesn't work (the PC doesn't boot when inserted, even when the other one is inserted). But I count on LDLC for the follow-up :)
So far, with my r5 3600 and my CM x570 from MSI, it's the perfect combo especially at this price. The RAM is well recognized at 3600Mhz and I feel it in my performances.
I'm not sure what to say about the delivery, except that during the ordering process there is a lack of details about the estimated delivery time, which is the case with all the websites. I've been using it for a while now, but I'm not sure how long it will take to get to the shop, so I'm not sure I'll be able to use it again. I'm not sure if it's a good idea to add a date like on Amazon during the order process :) otherwise everything works fine
It looks like this memory supports higher frequencies, but the bios recognizes it as 2133mhz..... and so by default uses it as such, which is quite disappointing. As the overclocking parameters are quite incomprehensible to the uninitiated (and it's not my thing), I have the impression that I've been cheated a bit since in the end, I'll only have rather slow strips, whereas I had conceded a little extra to have some bandwidth on the memory bus
8600K gygabite z370 gaming 7.CPU 4.8ghz on all cores. XMP perfect, 3600mhz frequency, at this price it's really affordable and allows me to OC the CPU well.Under Everest in latency, it's the best performing, right at the top of the table.I was afraid that the ddr4 timings would be too high, coming from the drr2 with very low ras cas. This is the kit to buy at the moment!
In the same universe: 3600 mhz. ddr4
