Limited life span
The RAM has only worked properly for 24 months.
Now it causes random reboots of the PC, which is annoying ....
General information |
Product name |
G.Skill RipJaws 5 Series Black 16 GB (1 x 16 GB) DDR4 3200 MHz CL16 |
Brand |
G.Skill | |
Model |
F4-3200C16S-16GVK | |
Memory format |
Typical use |
Desktop computer |
Memory type |
DDR4 | |
Memory format |
DIMM 288-pin (DDR4) | |
Memory |
Capacity |
16 GB |
Memory Frequency(ies) |
DDR4 3200 MHz | |
Memory standard |
PC4-25600 | |
Memory specification |
Unbuffered | |
Number of modules |
1 | |
Capacity per module |
16 GB | |
LED |
No | |
LED RGB |
No | |
Cooling |
Radiator |
Yes |
Radiator color |
Black | |
Fan supplied |
No | |
Timings |
CAS Latency |
16 |
RAS to CAS Delay |
18 | |
RAS Precharge Time |
18 | |
RAS Active Time |
38 | |
These timings are supported with a minimum voltage of: |
1.35 Volt(s) | |
Voltage |
1.35 Volts | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all G.Skill products
Product referenced on 29 Dec 2015
The RAM has only worked properly for 24 months.
Now it causes random reboots of the PC, which is annoying ....
I recently switched to DDR4, and I'm taking this little strip (taken as 2x16GB for me) which does its job without being flashy. Coupled with a Ryzen 7 3700x and MSI motherboard the XMP profile loads easily.
Great job!
The job is done. You get what you pay for. I use this model of RAM on two PCs, never any problems. Stable, reliable, it's just RAM.
Note that sometimes you have to overclock the ram to get it to run at its normal rate, which I have had to do and I have had no problems and no instability.
I'm not sure if I'm going to be able to use this as a replacement for my b450 gaming plus max, but I'm sure I'll be able to use it as a replacement for my b450 gaming plus max, and I'll be able to use it as a replacement for my b450 gaming plus max, and I'll be able to use it as a replacement for my b450 gaming plus max.
My bios recognizes it automatically at 2400 Mhz, by forcing the frequency in manual I manage to make it run at the max at 2933 Mhz but beyond that impossible to boot. So a little disappointed since it is displayed DDR4 3200 Mhz.