Pictures may differ from actual products
The TILTeeK FixCard is an innovative and ingenious system for securing, wedging and holding graphics cards and CPU fans. Easy to install, this safe, reliable and robust system is ideal for transporting, moving and using your machine every day.
Mounting and wedging system for graphics card and fan tray
Available from 34€15 on the outlet deals
Safe transport and travel
|
 |
 |
Exclusive patented system made in FranceFixCard is an exclusive patented system, designed and manufactured in France. Shockproof and lightweight, it does not heat up and allows the installation, support and holding of up to 2 graphics cards (additional fixings optional) and a ventirad. FixCard is easy to install in already assembled configurations. No need to remove components, just add your new mounting system. |
Useful in everyday lifeWhether you move your machine often or not, FixCard is ideal for everyday use. By supporting the weight of your graphics card and cooling unit, it prevents parts from sagging and damage to your motherboard by removing stress from the PCB and components. Processor socket and PCI-Express port are perfectly protected. |
 |
 |
Simple and universal useFixCard is very easy to use. Installation takes only a few minutes. The system consists of 2 height adjustment rails, a bracket and a PCI holder. All pre-assembled. Two "clamps" hold the graphics card in place and a rubber strap holds the cooling unit. Clamping knobs, screws and spacers are supplied. |
High-end designFrom the choice of materials to the machining of parts, FixCard has been carefully designed and built to last. It is shockproof, light and does not heat up. The guides and the support are made of the best steel and have no sharp edges. The flanges allow precise fixing and do not damage the materials on which they rest. The special silicone coating on the mounting flanges withstands high temperatures (>150°C), far above the maximum temperatures emitted by the graphics cards. The soft contact of the silicone mounts preserves the materials of the PC case and eliminates the risk of vibrations. |
 |
Select your criteria
General information |
Product name |
TILTeek FixCard |
Brand |
TILTeek | |
Model |
3601600004565 | |
Technical specifications |
Accessory type |
Graphics card fixing |
Color |
Black | |
Warranties |
Legal warranty |
See terms & conditions |
See all TILTeek products
Product referenced on 1 Dec 2016
The product is compliant and the service is fast.
The delivery was a problem because of the driver, but LDLC reacted immediately to solve the problem: efficient service...
Thank you very much!
Very good graphics card support. I recommend it if you have a fairly massive GCU to avoid damaging your motherboard because of the weight.
Ingenious, well thought out, and most importantly plays its part in supporting the graphics card. My Gigabyte 2070 Super with 3 fans started to bend under its weight over time. Large and heavy card (2.5 PCI slots).
Ideally to be installed from day 1. Here I hope it will straighten the graphics card PCB over time.
I had a bit of trouble installing it and had to cut off part of the vertical rod because although my tower is very high (Zalman GS1000), there was a reinforcing bar in the lower quarter that was in the way. So I leaned on this bar.
I also added two nuts to secure the two vertical rods that slide into each other, the only screw/nut set at the bottom seemed a bit insufficient.
Once adjusted, this support is very well anchored in the tower and does not move anymore. The two parts to block the graphics card play their role well, once blocked, the graphics card can not move.
In short, an indispensable device when you have a big graphics card.
You can feel the quality of the product, everything is done to the hundredth of a millimetre, just magnificent, everything is already planned, produced to support a CG and a CPU. assembly time barely 10 minutes
