best riser
if you're looking for a riser for your graphics card, i recommend thermaltake, the best there is.
if you're looking for a riser for your graphics card, i recommend thermaltake, the best there is.
The deadlines are always met.
I wanted to optimise the position of the CG, to have a better cooling.
I had no problem fitting it, the length is more than sufficient.
Attention, no screws for the fixation are delivered.
Results: 10° reduction of the temperature of the CG.
I should have taken a round tablecloth to put it on the outside of the case, but very good product nonetheless.
Used for my new setup to solve a problem of lack of space in the case. This riser allowed me to place my RTX 3080 in a vertical mount without any problem. The product was in every way what I expected.
Two remarks:
- For recent motherboards, think of changing the mode of the PCIe 16 port to 3.0, several feedback indicate crashes when the port is in 4.0 and uses a 3.0 riser (I did not test myself, I directly made the settings.
- Depending on your box, pay attention to the space for the connection. In my case (Antec P120) the cable passes at 3mm from the bottom fans. It doesn't touch but it disrupts the airflow of one of the 3 fans.
Good PCI-E 16x band.
Good length to check with your configuration.
Flexible enough.
Not disappointed with the hardware.
9/10, as I find the tablecloth a bit short, I guess there are limitations to this kind of extension.
But it's still a good product.
Flexible and easy to install. Very good quality. Order arrived well despite the confinement. Thank you
I've been using it for a while now, but it's not working on my computer (ASUS ROG CROSSHAIR VIII + ASUS ROG 5700XT)... with repeated crashes.
Otherwise, not very practical to set up, some design
Does exactly the job expected. A quality product, no loss in this port extension, you can continue to exploit your PCIE port to its fullest.
Very good quality product.
Allows me to enjoy the "WoW" effect of the RGB fans of my CG mounted vertically in a BeQuiet case. Sufficient length.
Nothing to complain about. I recommend it.
I gave it 10/10 because for my first riser I find it of a very good quality and I recommend it to all the people who want their card to be vertical, moreover I did not have any loss of fps so I have only one thing to say, bravo Thermaltake
Hi, it's a pity that when you buy the Coolermaster H500P box it is not indicated that if you want to put your video card vertically the tablecloth is compulsory and costs more than 40 euros!
The product is effective for its price
Low Fps losses just 3 or 4.
The length is just right, but 5cm more would have made the riser less tense.
Mounted in the thermaltake level 20 GT. ??
The cable is one of the strongest available, especially compared to the non-dame cables on the market, it costs a bit more, but the quality is there, thanks LDLC.
I'm very pleased with the product, no image degradation or loss of performance, the length allows you to position the graphics card as you want without constraint, maybe a little rigid but if you go slowly the cable takes a good shape. I recommend it.
The 200mm allowed me to position my graphics card vertically without any problems, although I would have preferred to have a little more room to bend the cable a little less, but otherwise nothing to complain about.
I'm very pleased with the quality of the riser, it's much better than the one that came with the Thermaltake P5 and it shows at first glance. I've never had a graphics bug with this riser, unlike the old one, so I recommend it.
Used in a Thermaltake View 71 TG RGB case.
I can finally enjoy my graphics card with RGB lighting. I had no problems with the assembly.
PS: I had no problems with the delivery by LDLC.
The product is simple and very efficient, it is mounted in a Thermaltake view 71 rgb tower without any problem, it is even easier to mount than on the motherboard, and the advantage is that the graphics card is visible, especially when you have an RGB graphics card.
I bought this cable to install my graphics card visibly other than on the edge in my configuration. The cable does its job perfectly and shows no loss of performance (less than 1%). Fast delivery. Easy to install. I highly recommend this cable if you plan to mount your card the other way around.
The product is simple but effective, used for my core P5 in addition to the one delivered with it.
The losses are equal with or without the rider so I am satisfied.
Now to see in time if it holds.
Bought to put in a thermaltake view 71 rgb case, this cable perfectly fulfills its role, no loss of performance (less than 1%) and a graphics card finally visible other than on the edge! I highly recommend this cable if you plan to mount your card the other way around
Very good cable
no loss i tried other adapters
I recommend THERMALTAKE PCI-E X16 RISER CABLE
on a Lian Li PC-O11WX tower msi GTX 1070 gaming 8 go graphics card
very good quality
I've been using it for a while now and it's a great product.
I needed this to move my graphics card which was taking up 2 slots blocking a slot.
This tablecloth is of impeccable quality.
It's solid.
It's perfect, it meets my expectations.
It's specific and functional.
I'm very pleased with the quality of the product and the price.
What can I say, perfect, it meets my expectations, indeed this kind of product is not bought by anyone because of its specific use.
In short, I started modding a Masterbox lite 5 tower with the vertical CG
everything works perfectly, no loss of performance
when the visual rendering of the tower is ball!