9€95
Used to replace the thermal paste on a SAS card, subjected to high temperatures and nothing to report so far.
You can trust thermal grizzly kryonault,thermal paste,for intensive gaming use
thermal grizzly kryonaut is a very good thermal paste that is easy to apply thanks to the spatula supplied.
Super everything is assembled together good configuration for gaming made turned valuing 200fps largely I recommend
We no longer need to introduce this thermal paste, which is easy to apply with a spatula and cools to perfection.
Thermal paste very satisfactory, I have a temperature of 35 degrees on average and 45 in games, the syringe makes it possible to make only one processor.
Delivered with its little spatula, guaranteed efficiency, no worries
Works perfectly
Nothing to complain about, very effective. I applied it to my processor, coupled with a Dark Rock 4 and the temperatures were low.
I'd recommend it!
You might think that all thermal pastes are the same, but they're not. There are many differences, and this one's a real winner!
Perfect, exactly what I need for my processor, I got just the right amount of paste, perhaps disappointed by the value for money?
fast delivery, very effective paste for powerful processors. (thermal gain - 6° Ryzen 9 overclocked)
recommended product.
The best thermal paste so far in my use (OC on 13600KF and OC+UV on graphics card).
Applies very well with the spatula provided! (The best method of application)
T°s have obviously decreased on the CPU and CG, compared to a paste supplied with an AIO for example, or the original paste on a graphics card.
I had a processor that was running without thermal paste and it was getting far too hot despite the watercooling.
Adding this paste almost halved the temperature.
As an overclocking enthusiast concerned about the thermal performance of my system, Thermal Grizzly Kryonaut thermal paste is a must-have choice for any serious user.
Highlights:
Superior performance: Kryonaut's thermal conductivity is nothing short of impressive. It significantly reduced the temperatures of my processor, offering more stable performance and improved overclocking potential.
Ease of application: Its ideal consistency makes application very simple and clean. The syringe supplied with a fine nozzle allows precise dosing without wastage.
Longevity and reliability: Even after prolonged use, Kryonaut maintained its performance without drying out or hardening, ensuring constant heat dissipation.
Versatility: It is suitable not only for processors, but also for other components requiring efficient thermal dissipation, such as graphics cards or heatsinks.
Value for money: Although slightly more expensive than some other thermal pastes on the market, its performance and reliability make it a worthwhile investment for any computer performance enthusiast.
Points to note:
Although Kryonaut is exceptional, its price may be slightly higher than some other thermal pastes on the market. However, the difference in performance and reliability more than justifies the investment.
In conclusion, Thermal Grizzly Kryonaut is without doubt the best thermal paste on the market today. If you're looking for lower temperatures, greater stability and ease of application, I strongly recommend you opt for Kryonaut.
One of the best on the market. However, the quantity only allows a maximum of 2 uses, so don't make a mistake when buying.
Used on a 5800x 3D, this processor tends to heat up easily, but it doesn't exceed 80°C with this paste and an AIO 240.
The only default is the quantity of the small tube just right for a CPU or GPU.
That said, it's easy to apply and highly effective, simply day and night with the thermal pastes supplied as standard.
the best thermal patch on the market, applies very well with or without the spatula supplied, and lasts well over time too
Simply one of the best thermal pastes on the market, when you know that these are the same manufacturers as Conductonaut, they have nothing left to prove.
Does its job, slight improvement on temperatures.I saw the syringe plys large.made for 2 use
Hello
I recently bought this product for my ps4 pro because it heats up a lot when I play so I decided to do some research in order to find THE BEST THERMAL PASTE FOR PS4 PRO and I thought that this thermal paste was the best because a lot of people say that it's very good and I bought it and everything and then when I play to test it makes 100X more noise than before my ps4 pro does that making stops without stopping makes noises and everything it's just unbearable.
In short, don't buy this for the ps4 pro.
Nothing to say. The kryonaut does its job, no need to introduce it. A little expensive, but better value than low-cost.
Very useful, good reputation and apparently very efficient when the processor is running at 5GHz temperature of 27°C ... without major stress.
well it works fine and it cools very well... see in a year or two ;)
lalalalalalala you have to fill in :p
I bought this i7 13700K to replace my i9 9900K. It is awesome in terms of performance. I have made a big leap forward in terms of minimum FPS.
However, it does get very hot. I didn't stay with the factory settings. Even with Corsair's 360 AIO cooling, the temperatures soar. So I did an undervolt, etc.
So you need good equipment to make it stable.
Thanks LDLC :)
I swear by this thermal paste. Ok it's more expensive than the others (but not by much) but it really makes a difference as it has the highest thermal conduction on the market, it would be silly to bargain for 2-3€ for something you change every 2 years, and take the lowest quality.
I immediately saw the difference when I changed the paste on my laptop, and the same when I changed the paste on my husband's CPU and CG tower, we lost 10°C in the game and that's not negligible, especially on the laptop! In addition, even a tube of 1gr is economical, I was able to make these changes on both machines with a single tube!
very good patte easy to apply 1 GRAM a little bit too much for several uses .
received in time .
On old PCs almost 10° difference with the old thermal paste.
I recommend it, it's fantastic and I've done at least 4 CPU's with it and there's still some left!
Arrived quickly, used for a replacement processor with the same tdp (I5 6600k to I7 7700k), with the same ventirad, and the new proc heats less than the old one
There is hardly anything in the tube, 2 applications. Similar result to artic silver which is much cheaper.
The quality of this thermal paste has been proven. Weak product, the temperature rendering on probe is excellent.
Ryzen 5600X 25~30° in idle and 37~43° in multigaming load.
I gained a few degrees compared to the NZXT stock thermal paste.
Not much difference between the original paste on my PC and this one. Good value for a change but performance wise I expected better.
The best thermal paste.
I've been using it for at least 4 years on my cfg, the performance is really good.
I have also used it to rejuvenate a colleague's ps4 fat, the result is great.
I went for this paste for its thermal conductivity almost 2 to 3 times higher than most of the others, according to the description sheet it would have a thermal conductivity of 12.5W/Mk, against 3.5W/mk to 5.5 for many others.
I was using noctua before, and to my great surprise I didn't gain anything in temperature, on the contrary, I heat more than 2 to 5 degrees?
So I dismantled it again, cleaned it well, and put this paste on it again, which is horrible, very sticky... in short, I don't like it at all.
And finally, I recommended Noctua, and I found my temperature known until then, 5 degrees less than with this thermal grizzly ....
So I put 2 stars, for the ldlc service always very fast, otherwise the paste is zero for me, I am sure that the thermal conductivity of 12.5W/mk is fake, the Noctua is much better
I bought this thermal paste to replace the one on my PS4 Pro, whose noise was becoming unbearable. I chose this paste after reading the various rave reviews about it that said it was night and day.
In the end, the difference is very slight compared to the old one, and it's hard to know if the little noise reduction of the console comes from this paste, or from the fact that I applied a new paste... which in this case would have been the same with another one.
In the end, it's not a bad paste per se, but those who think they're going to turn their PS4 into an Xbox Series X (noise-wise), forget it, it doesn't change much. The problem is the design of the console and there's nothing you can do about it except play in a fridge.
This paste does its job very well, it cleans up very well.
There is enough for two uses.
I tried the paste on a Peltier module, the temperature drops quickly and is maintained. On the hot side, the heat dissipation is perfect, which makes the Peltier module more efficient.
I would recommend this product without hesitation, the tube is small, you have to use little as explained in the instructions which are very well done, in several languages.
The small spatula for spreading is very practical.
Easy to apply, very good consistency, delivered with a plastic spatula, good capacity...
This thermal paste totally does the job, with a good WC it holds any game with temperatures that keep the processor from overheating.
Thermal conductivity: 12.5W/mk is excellent compared to others in the same price range
Prestige quality paste for any CPU /GPU overclocker or to simply reduce the temperatures of our 2020 AMD / INTEL multi-core processors.
On a custom Ryzen R5 3600 watercooling I'm at 23° idle and 30° under load on OCCT.
What a pleasure.
Thermal paste to cool some components after dismantling the ps4 sony processor and blu ray player
Hello,
I really expected a better performance but it is not, I had a thermal paste provided basic under the pump of my water-cooling NZXT and change by this paste grizzly before in idle I turned to 37-39 ° max now I am at 41-43 ° so much to say that changing paste to have more degree to the conteur was not the goal ... any time I say any time it is perhaps due to the small quantity I had.
On the other hand, when loading the dough, the temperature does not exceed 69°.
Good thermal paste, but other less expensive thermal pastes do the same or even better. I think the manufacturer's price should be reviewed on this product!
I've bought a thermal paste in the shops and my PS4 was still an aeroplane lol, but when I read the comments on this paw I didn't hesitate. I'm very happy with this product and would recommend it to anyone who wants to use it.
I didn't know about it and frankly, I don't regret it.
I used it on my PS4 which sounded like an aeroplane engine ready to explode.
After application (and frankly put a lot of it on the whole surface and not just a grain of rice in the middle (tested and not approved)) the PS4 has recovered all its youth! It's night and day, really.
I also used it on a PC, it does the job too.
The only downside is that it's a real pain to apply, even with the little plastic scraper that comes with it. The texture clings in layers and has trouble spreading properly. But considering the performance, I don't care about this detail.
Very good thermal paste. But I expected better than the one supplied with my Scythe Mugen ( Ventirad ). I have extended it on the i9800K very good cooling.
Temp 60 ° voltage: 1.03 volts, Power dissipation: 100Watts
Same thing, on a CG Msi 1070 Ti which does not pass 70° at 100% continuous use for several hours ( sim racing ) . Taking care to push the fans to 1700 RPM. ( Msi afterburner )
Very good quality of the paste, put on an I7 9700KF under a BeQuiet Pure rock, I have very correct times going from 60° to 70° max, with a cross-shaped application.
The paste is not conductive, be careful though, the paste is quite liquid compared to other brands,
In the segment it does not necessarily do better than the competition.
For high-end thermal doughs that are not metal-based, the difference is very small. I have not seen any change from what I usually use.
However, it is easier to apply than the last "high end" thermal paste I used (MasterGel Maker from Cooler Master), which tended to be a bit too consistent.
There is enough thermal paste to do 5 applications I think.
Nothing to report, maybe a bit expensive for what it is (especially in the 1 gram version) but I still recommend it.
All and supplied, I spread on an Intel 5i processor and on the surface of the fan before junction and there is still some.
So top no risk in missing.
Top performance as a thermal interface, only surpassed by liquid metal (which has its own drawbacks).
The syringe allows two or even three applications depending on the quantity used, but not much more.
In the long term, as it is a silicone based paste, it is recommended to renew the application once a year, for long term applications, prefer Hydronaut, very slightly less efficient but which will stay in place better.
