Customer reviews of the Adapter for 1 HDD/SSD 2.5'' in 3.5'' bay
-
55%91 reviews
-
20%32 reviews
-
11%18 reviews
-
6%10 reviews
-
8%13 reviews
Poorly designed product
-
Number of reviews: 1 Average rating: 4
not always suitable
To install the SSD in my HDD rack, I had to slightly enlarge the holes in the adapter to install the slides with mounting claws that came with my case. The adapter is very difficult to insert into the HDD rack, so I gave up trying to remove it. It was very difficult; it was practically stuck. Please note that I have never had any trouble installing hard drives on this case; the dimensions are standard, so I did not measure them.
In conclusion, buy it if you are sure it will fit in your 3.5 slot and that you can screw it in or secure it with the case fasteners.
As for ldlc's services, they were excellent. I ordered on Tuesday afternoon in the shop and it was delivered on Wednesday morning. 5/5 for service.Review automatically translated -
Number of reviews: 2 Average rating: 10
Compliant product
Product as described. Fast delivery despite a busy period for deliveries (Christmas).
Review automatically translated -
Number of reviews: 1 Average rating: 10
2.5" / 3.5" adapter
A simple item that is very easy to install, allowing for immediate and inexpensive operation.
The item was exactly what I needed and matched the photo displayed.
Thank you.Review automatically translated -
Number of reviews: 2 Average rating: 9
Very good
Buy in store. Top-notch service and customer care. No complaints. The rack isn't the right size (even though I measured my tower), but the fasteners/screws are strong enough to hold the SSD in place. So it's OK.
Review automatically translated -
Number of reviews: 4 Average rating: 10
Perfect
As with the memory stick, upgrading an old PC by installing an SSD in a 3.5-inch slot is no problem.
Review automatically translated -
Number of reviews: 4 Average rating: 9
Order as described
The product lives up to its description, but in my case I couldn't use it with my computer configuration.
Only the screws were useful.Review automatically translated -
Number of reviews: 15 Average rating: 9
Good quality
Simple and ideal for mounting 2.5-inch drives in a 3.5-inch bay. The only downside is the 100-character limit for comments.
Review automatically translated -
Number of reviews: 2 Average rating: 10
Good, choice of screws needs to be reviewed.
This adapter allowed me to add an SSD, which is essential.
It's not perfect, it comes with eight screws, four for fixing to the 3.5 bay and four for fixing the 2.5 drive to the adapter, these four didn't fit my Samsung QVO 870, fortunately I had screws.
Generally, we have a lot of screws with PC tower cases.Review automatically translated -
Number of reviews: 3 Average rating: 8
Not compatible with the IcyBox IB 170 drawer
Can be adapted for use in a true 3"5 bay but not with the IB 170. Otherwise, delivery no problem.
Review automatically translated -
Number of reviews: 1 Average rating: 10
SSD adapter
This device is not suitable for placing an SSD.
Disappointed with the product, I am not returning it as the cost would be higher than the purchase price.
I had to twist the part to get it to fit. I had to twist the part to get it to fit and the screws supplied were not suitable, fortunately I had what I needed.
Take a good look before you buy.Review automatically translated -
Number of reviews: 7 Average rating: 7
Not suitable for HDD case screws
HDD screw pitches are generally 6-32 (large screw pitch): on this support, the classic 6-32 HDD screws don't fit, so it's impossible to use the quick screws on my case (Lian-Li). It's cheap, but we know why. Otherwise, LDLC delivery is fast and efficient.
Review automatically translated -
Number of reviews: 7 Average rating: 9
Correct
Universal support for SSD and HDD 2.5. Correct quality and easy assembly with screws and bolts supplied.
Review automatically translated -
Number of reviews: 3 Average rating: 9
Does the job, but the fixing could be better
I used this bracket to fix a 2.5 SSD in a space dedicated to a 3.5 drive. The fixing works, but I would have preferred to have the screw threads aligned with a 3.5 drive on the bracket rather than just having the space needed for it to be blocked by the screws, that would have been a more solid fixing.
But it still works.Review automatically translated -
Number of reviews: 85 Average rating: 9
2.5" adapter
Adapter used to insert an SSD.
No need to worry about installation.
What's more, all the screws and bolts are included.Review automatically translated -
Number of reviews: 2 Average rating: 10
Excellent
Super fast delivery, compliant product, very good value for money. I will start again. I would recommend ?
Review automatically translated -
Number of reviews: 1 Average rating: 10
That's great.
I had a bit of trouble putting the 2 together at first, but with a bit of thought, it worked really well.
LDLC I've always counted on you and I'm always right :)Review automatically translated -
Number of reviews: 3 Average rating: 10
No problem at all
This is the second one I've bought. Very good value for money. It enabled me to recover an old laptop hard drive and install it on a desktop PC to keep the data.
Review automatically translated -
Number of reviews: 2 Average rating: 10
quality products
Quality service with a wide range of very good quality products.
Very careful and fast delivery, unlike other websites.Review automatically translated -
Number of reviews: 23 Average rating: 9
For removable 3.5" rack
Adapter used in a pull-out server rack to replace a 3.5" platter drive with an equivalent SSD. Installation is straightforward and screws and bolts are supplied.
Review automatically translated -
Number of reviews: 4 Average rating: 8
Bad
An adapter that doesn't fit any PC: the holes don't fit every time
I'm really disappointed by this purchaseReview automatically translated -
Number of reviews: 6 Average rating: 9
Correct product
The only downside is that you have to use a bit of force to screw the screws into the holes, as if they were designed for a different size of screw.
Review automatically translated -
Number of reviews: 3 Average rating: 7
not 100/100 compatible
once the drive is mounted, its connectors are not aligned in the standard way, which means that it cannot be used on a drawer.
Review automatically translated -
Number of reviews: 4 Average rating: 7
Cradle not 100% compatible
It's not possible to fix this adapter correctly in the slot of my old 3'5 HDD. What's more, the screw threads are too small compared to the screws that held my HDD in place.
Review automatically translated -
Number of reviews: 5 Average rating: 9
Perfect, as usual with LDLC
I didn't have a place to put my ssd in my tower, but that's solved with this adapter.
installs easily, the ssd is very stable on it.
nickelReview automatically translated -
Number of reviews: 5 Average rating: 9
As described.
I bought this adapter for a 2.5" HDD/SSD in order to place it in a 3.5" bay. I have nothing to complain about: the item does its job perfectly. What's more, it complies with the description and photo shown. I'm completely satisfied.
Review automatically translated -
Number of reviews: 7 Average rating: 8
Fast, compliant delivery.
Very easy to use for installing an SSD in a 3.5" drive bay.
Easy to fit using the screws supplied.
I was a bit confused by the sticker that said not to let the drive's printed circuit touch the metal
until I realised that it only applies to mechanical discs. I was wrong there :)Review automatically translated -
Number of reviews: 4 Average rating: 9
Does its job
This product does its job, although I had to force it to fit (it's a bit big). I'm satisfied with my purchase.
Review automatically translated -
Number of reviews: 4 Average rating: 8
Corrugated sheet
It's hard to find fault with a simple sheet of corrugated metal with a hole in it, given that I'd checked beforehand whether it was compatible with my enclosure.
Review automatically translated -
Number of reviews: 8 Average rating: 10
Very good.
To install a Kingston 480GB SSD, once screwed on, fixed with two rilsans because of a slightly old case, a crash on switching on, recognised in the bios but not on the PC. After a tour of the disk management, ok, used to store games, does its job, very responsive, lifespan? Asus P8 card,2500K,1650, Windows 10, for 1080 games, sufficient.
Review automatically translated -
Number of reviews: 12 Average rating: 8
Not suitable for my bay, but easy to use
Not suitable for my bay, but easy to use.
I only had to put in 3 of the 4 screws and the product held perfectly.Review automatically translated -
Number of reviews: 41 Average rating: 9
Good and cheap
I bought these cheaply for my son's PC, which doesn't have a 2.5" slot. Supplied with 8 screws and 4 washers, great value for money.
Review automatically translated -
Number of reviews: 3 Average rating: 10
Very good transaction
The advisors were attentive before and after the order. The product received was in conformity and the deadlines were respected.
Review automatically translated -
Number of reviews: 1 Average rating: 2
not universal and needs a lot of modification
I bought this adapter to fit the new Kingston SSD A400 480GB into the 3.5" HDD slot of my Lenovo C40-30 all-in-one PC (with a tool-less opening and changing system for hard disk and ram!!).
I first had to give up on fitting two of the original rubber block silents on my computer out of the 4 available because the centre distance of the holes for screwing this adapter to the computer did not correspond to the centre distance between holes of my original Western Digital HDD! Fortunately the holes to fix the silents blocks to the computer are oblong so by deforming and not wedging them as it should be it goes through as well as it can!
Secondly, the long oblong holes to fix the ssd to the adapter don't allow to install the sata port close enough to the edge and the sata cable of the computer being a 90° angled plug, the assembly can't be put in place without a dremel cut of a part of the adapter to let the cable go towards the motherboard !
in short it is expensive paid for a vulgar adapter not very universal!Review automatically translated -
Number of reviews: 4 Average rating: 10
Delighted
received quickly and delivered without any problems material with all fixings and fits without any problem
Review automatically translated -
Number of reviews: 2 Average rating: 6
Wrong format + ultimately useless.
The product is well finished but I could not find the hole spacing on the adapter to correctly fit a crucial 2.5" SSD into a 3.5" rack in my tower (HP Prodesk)...
The product is well finished but I couldn't find the right hole spacing on the adapter to fit a crucial 2.5" SSD in a 3.5" rack in my tower (HP Prodesk)... Furthermore, when I looked closely I realised that one of my 3.5" slots also had screw holes for a 2.5" drive (it's written in very small letters)...
So the equipment is unusable and useless for my personal case.Review automatically translated -
Number of reviews: 1 Average rating: 8
expedition too long
Shipping is too long compared to the competition (shipping within 4 days compared to 7 days for you without taking the express option)
Review automatically translated -
Number of reviews: 2 Average rating: 10
Perfect
Easy to mount and suitable for ssd. The screws for the ssd and the adapter are included. The assembly is easy. There are no assembly instructions, as there is no need for them.
Review automatically translated -
Number of reviews: 19 Average rating: 9
Installing an SSD in your PC
Simple, easy to install, allows you to install an SSD in a 3.5" bay and make your PC faster
Review automatically translated -
Number of reviews: 3 Average rating: 9
Does its job
This little bracket is used to place an SSD in a tower that did not have a 2.5 slot.
Review automatically translated -
Number of reviews: 2 Average rating: 6
Misplaced holes
When I wanted to install my 2.4" disc in it, the holes for the screws are not at the right distance, so the disc is not fixed properly.
Review automatically translated -
Number of reviews: 3 Average rating: 5
Poorly fitting disc mounting holes
The slotted holes for the SSD are not the right size. The drive is mounted slightly crooked and on 2 screws. The adapter mounting holes are well machined.
Review automatically translated -
Number of reviews: 7 Average rating: 9
Simple, good all-metal anodised design
Easy to install in a 20 year old ATX tower :-)
Complete hardware included, screws to attach the adapter to the tower and screws to attach the ssd to the adapter.Review automatically translated -
Number of reviews: 3 Average rating: 10
Simple and effective
Used on an all-in-one MSI, the dedicated slot allowed to put an SDD without any problem. Simple and efficient.
Review automatically translated -
Number of reviews: 2 Average rating: 7
Side mounting holes do not fit a 3.5" DD
There are only 2 holes instead of 3 to put this chassis in place of a 3.5" hard drive
Flat mounting on the new towers is possible
From cheaper to more expensive by buying another 2 SSD bracket with 3 holes for a 3.5" HDDReview automatically translated -
Number of reviews: 3 Average rating: 10
Nickel
Order sent quickly. Product is complete. I have not yet had the opportunity to put them in place but all the screws are present.
Review automatically translated -
Number of reviews: 6 Average rating: 8
Does its job... but not in all cases.
This 2.5" to 3.5" adapter cradle does its job... but not in all cases because it is not as long as a 3.5" drive and when you want to integrate it in a computer that only offers a fixing at both ends of a 3.5" drive you can only fix two screws (out of the four usually used). It still works, but it is not satisfactory (the cradle can move).
Fixing the 2.5" disc to the cradle can only be done from underneath the disc (but, as far as I know, all 2.5" discs offer this type of fixing) using the gutters of the cradle which allows to adapt to any spacing. All screws are supplied.Review automatically translated -
Number of reviews: 1 Average rating: 10
Perfect product
- product delivered with 8 fixing screws and 4 small washers.
- very affordable price
- my Samsung 860 Evo 1Tb SSD fitted flat on the adapter without any problems (screws on the underside of the drive) and the airflow around the drive is good as the SSD holder is higher than the metal plate.
- the adapter fitted without any problem in an old medium tower which has 2 vertical rails for HDDs with oblong holes for fixing the disks (my old tower looks like the "Advance GRAFIT" case).Review automatically translated -
Number of reviews: 1 Average rating: 9
suport ssd ok
the product fits perfectly in an antec tower front mounted disks behind the fans(3)
Review automatically translated -
Number of reviews: 1 Average rating: 1
Not hdd2.5" compatible
The screw holes do not correspond to the 2.5" format, so it is impossible to attach a hdd to it.
Review automatically translated -
Number of reviews: 2 Average rating: 10
Perfect article.
I've been using this adapter for some time now and it's been a pleasure to use it for my Samsung SSD.
Review automatically translated

































