32€95
Added to the front of an "Air-Flow" box next to 2 other similar ones.
Royal, the ventilation is very good and above all silent.
Noctua's reputation is well established over time.
This type of fan can also be installed on a RAD.
I would recommend
Very good lifespan, as well as performance and quietness!
Always satisfied with the king of fans
The material is of high quality and the fans are super quiet. Great! I recommend these fans.
High static pressure fan, ideal to put on a watercooling radiator. I took 4 of these fans for my half and me, replacing the disastrous basic fans of the AiO Lepa aquachanger 240 kits. Golden silence and more efficient cooling (5°C~) with an ultra supplied bundle.
It is this fan that made me enter the Noctua sect and from now on I swear by this brand for fans, for the design we like or we don't like, but even if we don't like the quality and the performances are there.
The price is quite high but 200% justified, buy with your eyes closed.
This is the third one I've had.
Still as good as ever.
It moves the air, without noise!
I highly recommend this fan.
Mounted in a Fractal Design R5, in front, perfect!
A fan that does its job in a very good way: Low noise with efficient cooling.
Connections are present within the fan box to allow for various configurations.
noctua, with this fan pushes back again the quality of the air flow, respect, be attentive to the description of the notice for the installation that will help you to know where to put it; as always at noctua the supplies are more than complete, plugs extension silenblocs elastics, it does not miss anything .
I bought 2 noctua fans to replace the ones that were dead on my 2 cooler master hyper 212 on 2 different pc's (original fan failed the 2 are cooked after 3 years of use at 2 weeks intervals). they are very quiet easy to mount and are very well adapted on the master hyper 212. i highly recommend them. you will find everything you need in the boxes to adapt these fans on any pc. remains the aesthetics different from the other brands you like or you don't like it but the utility is the most important!
I recommend it to everyone !!!
I think that everything is based on the reputation of noctua...
you don't buy it for its colours, but for its efficiency and silence...
For those who are interested, it is installed in "push" on a "corsair H80i V2" and helped by its cousin the NF-A 12 pwn in "pull". all over a I7 2600K in a room at 18 ° ... pc on for two good hours and the CPU temperature is 28 ° ... without noise ...
Thanks Noctua :)
I only recently discovered this brand, thanks to a friend's second hand, well now my fans that will break down have found their master! even if slightly more expensive in equivalent.
NB: well I like these sandy/woody colours in my case...lol&roll
Looking for an extractor fan for my InWin 805C, I first turned to a Cooler Master JetFlo 120mm, attracted by its cooling capabilities. But unfortunately, this fan vibrates so much that I had the impression that a diesel generator was in place of my computer. So I was wiser, and turned to Noctua and its NF-P12 PWM. And not surprisingly, I was totally right. No vibrations, no disturbing noise, and no noise that would even propagate through the metal of the case. The noise level compared to my previous fan was masterfully reduced. Although, and this is a slight complaint I have to make here, I had to struggle a bit with this: the anti-vibration silicone mounts are an ABSOLUTE HORROR to attach. You have to twist your poor, feverish fingers all over the place to even get one through one of the mounting holes. So four, you can imagine the nightmare! But with a little perseverance and cramped fingers, the result is worth it. This is why I can only recommend this Noctua NF-P12 PWM, as it is so quiet, even at full speed, thanks to its thermo-regulation, while remaining efficient in cooling. To buy without hesitation.
I bought this fan at first to put it in extraction at the back of my case, and it finally found its place on my cooler master hyper 212 evo, in place of the original fan, that I moved in output on the ventirad, and connected as a chassis fan (thermo regulated) so I have no more or almost no noise,The fan does its job perfectly, and remains inaudible most of the time, the fan of the cooleur master when it, does not make as much noise as before and given that this one is now managed by the motherboard as a simple case fan, so less in the towers! I'm not sure if it's a good value for money if you're looking for a fan that's not too noisy and efficient, that will take up the space you give it, whether it's to cool a CPU or a case; I recommend it for those who are looking for a quiet machine, regarding delivery, LDLC is always at the top of the game, delivered on time, what more can I say? The only problem is that the rubber clips are very short and you can't grab them to pull them out and put them in place (for example, when you try to put the fan out behind the case, it's almost impossible to grab the top clip on the motherboard side and fix the fan correctly). I hope that noctua will correct this, the only flaw I can find.
I'm using an intel core I7 3770 non K processor and it's overclocked at 4,4 GHz, with this fan configuration I'm at 35 degrees in normal use and max 68 degrees in intensive use (games, mao, video processing..) for those who are interested, to get an idea.
