Pictures may differ from actual products
Creality SpacePi X4
Drying Box for 4 Spools
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
Dry up to four spools simultaneously, without compromising your prints
Designed to meet the needs of demanding 3D printer users, the Creality SpacePi X4 offers an all-in-one solution to dry, protect and use up to four filament spools at the same time. Its dual-chamber architecture allows different materials to be processed simultaneously, while its two 200 W PTC heating systems ensure efficient heating up to 85°C. Thanks to 360° hot air circulation, the heat is evenly distributed around the spools to limit moisture responsible for extrusion defects and failed prints. Compatible with 1 or 2 kg spools and 1.75 or 2.85 mm filaments, the SpacePi X4 also allows drying and printing simultaneously: a real advantage for multicolor prints, multi-material projects and the use of moisture-sensitive technical filaments.
Independent dual chamber and SpaceDry 4.0 technology
The SpacePi X4 stands out with its two isolated chambers, each equipped with an independent PTC heater. This configuration makes it possible to dry two types of filament simultaneously at different temperatures, within a single device. Depending on the number of spools to be processed, the user can activate one chamber or both: single-chamber operation can thus save up to 40% energy. At the heart of the system, SpaceDry 4.0 technology combines efficient heating, active dehumidification and desiccant regeneration to optimize both filament drying and storage. With an adjustable temperature from 45 to 85 °C and a programmable duration from 1 to 48 hours, the SpacePi X4 supports both common materials such as PLA, PETG or TPU, and demanding technical filaments such as ABS, PC, PA or PAHT.
features:
- 3D printing filament drying box
- Capacity: up to 4 spools simultaneously
- Architecture: dual isolated chamber
- Chamber control: independent
- Operating modes: single chamber or dual chamber
- Energy saving in single chamber mode: up to 40 %
- Drying technology: SpaceDry 4.0
- Heating system: dual PTC heating
- Declared PTC heater power: 200 W + 200 W
- Device rated power: 360 W
- Hot air circulation: 360°
- Dehumidification: active
- Desiccant regeneration: integrated
- Adjustable temperature range: 45 to 85 °C
- Adjustable drying time: 1 to 48 hours
- Spool capacity: 1 or 2 kg
- Maximum spool diameter: 200 mm
- Maximum spool width: 150 mm
- Compatible filament diameters: 1.75 and 2.85 mm
- Simultaneous use: drying and printing
- Listed compatible materials: PLA, PETG, TPU, ABS, PET, PC, ASA, PA and PAHT
- Input voltage: 220–240 V, 50/60 Hz
- Product dimensions: 382 x 290 x 270 mm
- Product weight: 5 kg
Select your criteria
General information |
Product name |
Creality SpacePi X4 |
Brand |
Creality | |
Model |
4005010100 | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
Harmonised legal guarantee notice
|
|
Safety Information |
Responsible person |
CREALITY 3D TECHNOLOGY(EUROPE) GMBH |
Postal address |
WANDSBEKER ALLEE 77 HAMBURG 22041 DE | |
Electronic Address |
yannickcastel@creality.com |
Product referenced on 7 Aug 2026
For the moment, there are no customer reviews.Write a review
