Pictures may differ from actual products
A must-have accessory to prevent your computer from becoming a nest of dust. Over time, your computer's components will thank you...
Magnetic dust filter carr 120 mm (black frame, black filter)
Select your criteria
General information |
Product name |
Magnetic dust filter carr 120 mm (black frame, black filter) |
Brand |
Generic | |
Model |
N/A | |
Warranties |
Legal warranty |
See terms & conditions |
See all Generic products
Product referenced on 13 May 2011
I bought a tower to cool an old booster pc with a passively cooled graphics card that tended to get a little too hot.
So I made a few holes on the side of the tower and added a ventillo that I had on hand.
But to avoid cleaning too often I took a small filter.
The only problem is that the magnet is a bit limited, it holds but it's only because of the screws of the ventillo which are 1 or 2 millimetres bigger than the magnet.
Far too expensive for what it is. By choosing this product, you will receive a filter that does not fit very well and is clearly too expensive. It's just a filter... There are more effective solutions for less money.
However, it does the job... 4/10
This magnetic attraction seems to me to be weak: a single jolt on the panel was enough to make the filter fall. Apart from that, nothing to say about the rest.
Very good, easy, useful
What more can I say?
Easy to clean
Easy to assemble
I put some at each potential air inlet...
Very practical to use!
Easy to install. Either by adding the sticker or directly with the band
very thin nothing goes through but air, great product! use on a flat surface for a good grip and good filtering! Very practical to use! Looked carefully at the width of the frame which exceeds 120 mm
