44€95
Superb experience, excellent welcome and advice.
I highly recommend the professional quality of this company.
Thank you very much.
So yes, it's not a premium case, but for the price I'm not disappointed.
There's plenty of space, clever disc mounts, room for cables and a clean finish. Gone are the days of low-cost cases where you had to cut your hands off during assembly.
The plastic front panel is a little fragile (the fixing pins were broken on the first shipment, with no visible impact on the box, but the after-sales service immediately took care of the problem with a very quick second shipment. Thank you again) so be careful of knocks when moving it.
I give it 5 stars. We were given extremely good advice and the appliances met our expectations perfectly.
It does the job you expect of it, it's small and discreet, I wanted one that didn't let too much light in but the choice of colours is limited, you can't customise the colour, there are several choices but nothing more, so I chose blue which was the least aggressive colour. I'm also not very happy with the plexiglass plate, which is very static and retains dust well. Overall, it's still very good for what I expected.
the case is of good quality despite its low price. the level of finish is quite correct. i recommend it.
To set up a low-budget configuration. Ventilation concerns: take 3 Bequiet fans (2X120 and 1X92). Beware of the height of the cpu ventirad (-14cm and the mediocre compatibility of an AIO) so take a Bequiet rock lp allowing a cpu TDP of 100W max.
The internal finish is rough and basic, and there's no way of fitting a proper management cable because there's virtually no space behind the motherboard. However, it does have its qualities, such as a low price, a sufficient number of ssd and hdd expansion slots and a sober rgb front panel. This case won't be able to cope with a large, 'warm' configuration, so it should be reserved for office use or light gaming (max cpu 65W and gpu 150W). I recommend an APU AMD or a Ryzen/Intel 65W max combined with a light GPU such as gtx 1650/1660 or RX6500/6600 max.
At first glance it looks nice from a design point of view but mechanically it's really flimsy.
What's more, I had a problem with a short circuit on the reset button during assembly, but fortunately LDLC was able to help me.
I would not recommend this product at all.
A case that's easy on the eye, sufficient screws and bolts, and enough space for a normal configuration. (ryzen 5 3600+rtx 4060)
In short, a case that does its job.
The casing gives a good view of the interior of the system, even with the glass slightly tinted. The RGB line is simple but perfect if you want to keep a sober look. No faults.
I had a small budget for a new PC, so I bought this case, which is available in shops.
It's simple and to the point, and there's enough room to fit a CG that's not too big. I've got a 1070 that fits right in.
The RGB front panel is pretty cool, with around ten colours/animations to choose from
a big fan at the back to cool everything and 2 dust filters.
Very good for the price, one star less for the quality of the internal coating, which deteriorated a little when the screws were tightened during assembly, but nothing dramatic.
I really enjoyed setting up my computer with this case, which didn't cost much compared to other models. Its sober appearance is pleasing and allows it to adapt well to a professional environment, while adding a touch of customisation thanks to its RGB light strip.
However, I do regret the lack of useful cable management hooks on the right-hand side panel, but that's a detail.
The casing conforms to its description. However, 2 points bothered me.
Firstly, it says that 30cm graphics cards are compatible, but not really. With the lever effect for inserting the card, it's more likely that graphics cards with a maximum length of 28-29cm will fit (my 108°ti Asus Rog strix didn't fit).
Next, the 80mm fan is surprisingly noisy. Almost disturbing. I wanted to reduce the fan's native speed in the BIOS, but as this product is sold with only one fan, reducing its speed wouldn't be a good idea for the AirFlow, which is already very limited but sufficient for an RX6600 that doesn't heat up much. With another 120mm front-mounted fan, this might be possible.
The plus points are that the case is small, which is great for not having a big, awkward PC on the desk, especially in my case with a dual PC for rendering. The design is just like the photos, so it's pretty cool. The plastic effect and non-glass pane, which let's be honest for this price isn't a bother, it just has to do its job as a case with a little "see inside" effect and it's done. So it's just a shame about the 80mm fan noise.
lame; the rgb failed after 6 months... finish the aerocool brand decu
the effect is funny chip
I'm not sure I'm going to be able to count on the delivery, but I'm sure I'll be able to count on the delivery of the device. I'm sure I'll be able to count on the delivery of the device, but I'm sure I'll be able to count on the delivery of the device, but I'm sure I'll be able to count on the delivery of the device.
Correct for the price.
Beautiful, deburred, robust and comes with the necessary mounting hardware.
The lighting is well managed, the movement effect is good.
Product as described.
Suitable entry level quality enclosure with decent layout space.
As for the LED light at the front of the tower, nothing is really functional, which is a pity and no documentation concerning its wiring and/or connection is supplied with the product.
All in all, an attractive package for its price.
This tower looks pretty good at first glance, you don't have to look closely at the details as the structure is all plastic and the transparent side is plexi but overall it's far from being awful.
I'm not sure how much room there is for a 280mm long graphics card, but for a 300mm card it remains to be seen. I strongly advise you to buy at least 1 120mm fan for the front panel as it keeps the heat in, I personally took 2 of them like that so I am safe.
Very nice and good case with an integrated LED strip that has a lot of function + a small integrated fan.
Great case for the price
Some small defaults are still present: plastic glass that scratches really easily, 3.5 inch HDD slot badly designed and management cable not very easy.
I would recommend it to anyone who wants to use it as a standalone unit.
I recommend it 100%.
I bought this case to build my son's first gamer pc, and it shows quality with its dust filters, its logical layout, its hdd ssd storage and the possibility of mounting a watercooling system on the front (enermax for the latter). Its side glass allows to highlight the components and with the rgb of the watercooling, the smoked glass makes a nice effect. Speaking of the rgb, the front panel lights up with a line in several colours selectable on 3 effects (fixed, running, flashing).
A light but solid case that can accommodate a muscular configuration (space for the gpu).
magnificent tower especially for the price but also for its functional side practical also for the cable management and very beautiful aesthetically thank you
It's a good case overall but if you're a fan of RGB or want to put a 240mm watercooling it's complicated and the 360's are impossible. If your motherboard is an ATX it will work but it will be less comfortable to mount. If your goal is comfort and aesthetics, you should consider a larger, better quality case. It will be perfect for someone looking to build a cheap PC with a pretty good exterior.
I'm very pleased with the delivery service and the quality of the product. I'm very happy with my first purchase from you!
I am very pleased with the quality of the product and the service. I also took a power supply. I'm very pleased with the quality of the product.)
Thank you LDLC.
I am very pleased with the quality of the product and the service. I'm very pleased with the quality of the product and the price.
IT'S GREAT!
Good product and I am fully satisfied.
Its aesthetics and the layout of the external connectors are very pleasant.
I'm not sure if it's a good idea to use a metal one, but I'm sure it's a good idea to use a plastic one.
A well finished small format case for the price. No front fan and the rear in 80 which would be better in 120. But very satisfied with my purchase
I'm really happy with this product, it's a great product and I'm really happy with it.
I am really satisfied with this product.
I gave 5 stars because there were no problems. Everything was perfect.
I have assembled a new PC with this case and everything fits perfectly. The screw kit and especially the cable zippers served me well in assembling the PC and making it look "clean".
The case is compact but allows for ATX motherboard mounting. Despite the limited depth of the case, I was able to fit a blue DEEP COOL GAMMAXX 400 V2 fan without any problem.
I'm not sure if it's from my motherboard, but I'll give it 8*, otherwise the LEDs are nice, a good box for the price.
It's a very nice case, unfortunately the quality of the screw slots is not great, it's also a case that is too small for an atx motherboard
For the price, eh... We won't begrudge it. Good point: the RGB band is powered by MOLEX, so you don't need a motherboard with an RGB port.
1 point less, only 1 fan in 80mm... A 120 in the front is highly recommended!
I love this product, Aerocool is beautiful, not too expensive and frankly I am won over. I highly recommend it.
Some small details and drawbacks on the right or on the left that are a bit too "made in china", but considering its price I strongly recommend it!
It lacks a bit of space on the right side panel for example, or the screw on the top transparent panel has difficulty to go in when there is a water cooling radiator (I cut back the screw of 3mm and it's all good)
Really, only small details that make me unable to give the maximum mark! The price is unbeatable. :)
I didn't order a microwave did I? My graphics card goes up to 90degrees with this box, it's crazy! I would only recommend it if you have a small configuration because I can't even play with my 1060 because it goes so high! One star because it's beautiful.
The dimensions of the tower are really small, so I put a micro ATX in it without any difficulty. The body of the case is made of metal, the window looks cheap (personally a burr on one of the edges of the smoked plexi window). The plastic front panel is a bit of a toy, again with a small burr on the led strip. A little advice for the mounting if you put 3.5 disks, mount them before the power supply, otherwise it's a real pain (DD slot is pretty bad, for SSD it's fine). If you add a 120 fan behind the front panel, a GTX 770 will just fit. Once mounted the RGB leds can be set directly on top of the front panel and it's really stylish whether they are in scan or fixed colour mode. Very happy with this purchase the case is really small and nice. Very good value for money.
Very nice case with a good led setup with a black or white style
Very good refreshment.
Good but difficult to remove the front and side of the house otherwise all is well.
Supplied with a fan.
From micro atx to Grande Atx it stays stable.
I hope this helps.
The advantage of this tower is its price, otherwise that's it. I was expecting a glass window and to see a plexiglass one that marks very quickly with screws that should not be tightened too much. The fan on top is a 140 and not a 120 as indicated. Be careful if you install a watercooling system at the front I find the metal part fragile (weight)
It's a good case, which deserves to have at least 1 more fan on the front. Otherwise, as I said before, I had some problems with the screws. But nothing really bad. Otherwise the quality is top, and the design is rather nice!
It's a decent, spacious and elegant case; also suitable for easy cable management.
However, the biggest negative is that the threading is horrible. I have rarely seen worse, I advise you to buy your own screws for this case.
It is nevertheless solid and elegant.
The product is almost perfect!
The pluses :
-Functional USB ports on the top (which prevents accidental removal)
-The design of the tower is really nice: you can vary the colours on the front and also leave a colour of your choice, obviously the LED function can be easily turned off by pressing it for a second
The price-quality ratio is interesting
- A ventilated space and many slots for the fans
Minus :
-Some tappings are poorly done, especially for the motherboard fixing spacers and the plexi front panel as well as the PCI card locking system (you just have to force it a bit)
-A lack of space on the invisible side for the power cables (provide straight sata cables to be able to put your SSD behind the motherboard as well as a straight power cable/adapter)
-A HDD slot would have been nice
I'm not sure if it's a good product or not, but it's a good product and I recommend it!
The product is as it should be, no worries except for some of the screw holes to fix the motherboard, some screws don't fit. Overall satisfactory. The USB ports and SD card reader work well, as does the front light.
