19€96
LED addressable via MSI Mystic Light,
A molex cable is supplied with the led strip, but check that a 4 pin cable (12V/r/g/b) is supplied with your motherboard (included with mine: MSI MPG Z390I GAMING EDGE AC).
The magnets do their job, no double-sided tape provided.
The headbands are designed to clip together (clip provided).
You can buy with your eyes closed ..... or there is Corsair but it is more expensive!
The 4 pin RGB LED strip is very good, easy to install, long enough and powerful enough to illuminate the case.
The strip is magnetic which is really good for fitting. I'm not sure if it's a good idea to have an extension cord to plug it in, otherwise trying to put it in directly from the RGB socket could be complicated and lose some length.
It's a very good tape and I recommend it!
Taking just one is a bit insufficient but with 2 cables you can cover half of your tower (ATX) without any problem.
The cables are magnetic and very easy to position.
The only downside is that depending on the position of your RGB connector on the motherboard (top/bottom), it can be awkward to mount because there is a direction on the connector!
Mine is positioned at the bottom of the motherboard, so when plugged in, the LEDs are not turned towards the inside of the case but towards the wall.......
So I had to twist the cable to put it back right side up ... it's a bit messy
The Gigabyte "Ambient LED" management software is also compatible with it!
Beautiful, Very Strong Colour, Compatible With My Asus Z270-F In 4 Pins, I Didn't Test In Molex As I Have No Use For It, Two LED Strips For My Big The Tower 900 Which Is 80 by 60 Are Great
In short, Buy With Eyes Closed
As with many RGB (non-addressable) products, the photo shows an ADDRESSABLE RGB rendering.
And of course I trusted the photo and I was fooled... and I find myself with useless strips in the garage
5 points because the intensity and the colours are there.
Not great LDLC
Installed in a NZXT S340 Elite White, on a MSI Z390 PRO CARBON motherboard, effects with the MysticLight, very nice rendering.
Extension cable provided with the motherboard, to be plugged on the 12V.
Fast delivery.
RGB led strip that works perfectly
This led strip is 4 pins (12V/r/g/b) not to be confused with the 3 pins (5V/in/gnd)
compatible with aura sync from asus on the asus strix Z270F gaming motherboard.
The magnetic mounting system is great.
The cable to connect to the motherboard is not included (optional)
I've been using it for a while now, but it's a good idea to use it with my motherboard.
I recommend this product
Works perfectly.
LED colours are very well managed by the
the RGB system of the MSI X370 Gaming Pro Carbon
Minus 1 star for the lack of a small RGB extension cable to place the strip correctly in the case.
