50€95
I bought them in 2017 and they have always worked very well.
I've never been disappointed with Corsair.
The product is conform (I already had the same series of strips), and the installation is quite easy. I'm very pleased with the product.
I recommend it.
The first memories systematically crashed my PC. After a quick exchange, everything was back in order. Super fast after sales service! :)
I bought 4 of them, after 1 year of intensive use,
One of them just broke today, because of the untimely reboot.
It's not normal to pay so much.
I'm not sure how much I'm going to pay for it, but I'm sure it's going to cost me a lot of money and I'm not going to pay for it.
The low profile is a big advantage for fans of big ventirads (I have a dark rock 4 and no worries about installation).
The author of the top comment accuses a little too quickly, indeed the bars are recognized at 2133 MHz, but it is enough to make a turn in your bios and to put them at the good frequency, that takes 1 minute to break.
Very fast delivery. Well packaged. They look durable. I've been using them for a while now, but I'm not sure if it's the CM or the RAM, but I'm sure it's a problem.
Bought it to get rid of the 4GB bottleneck, the system literally comes alive.
It is indeed 2x8GB DDR4 at 2400MHz according to CPUID. Top notch responsiveness, efficient.
I'm a little disappointed on the physical side because the heatsink on one of the bars is slightly bent, no longer ensuring contact with the RAM/thermal rubber at this point. I didn't try to put it back in place as it would have to be removed... I think it's nothing to worry about, the pads went in without a hitch.
I'm really happy with this purchase, rare performance for this price.
One month of use without OC, I had repeated blue screens. One of the bars is defective. It is obviously common considering the comments. I'm waiting to hear from the service department, hoping to be able to change the model even if I have to pay extra...
Works perfectly.
Mounted on MSI X370 Gaming Pro Carbon in XMP 2, with a Ryzen 1600x, they are well detected at 2400mhz.
Pushed to 2666Mhz for testing, they support the frequencies well with a slight rise in voltages, but in my case useless considering the frequency of the memory bus of the proc
The low profile is welcome with large fans
I took this material in the optics to increase the ram of my PC but bad luck, once put in place: black screen! nothing to make... I'm going to a LDLC workshop, they test the ram, the result is that the bars (or at least one of them) don't work, so I had to spend 250€ on G-SKILL bars (which I STRONGLY ADVISE) which work very well (I also have them on my second PC, in both cases g-skill = no pb). Now it's off to return the corsair equipment and ask for a refund.
As always, perfect delivery and packaging. 10/10
Product does the job, good height to avoid the inconvenience of running cables.
It's a great product, it's a great design - even if you don't care about it.
I'm going to put it in a confyg asus TUF Z270 mark2, i5 7600k, gygabyte GTX 1080 and corsair force MP500 240 GO.
Once the XMP is activated in the bios everything runs perfectly at the good frequencies announced by the manufacturer (1200 Mhz X2....14-16-16-31).
Nothing to say, except; "don't hesitate to buy!" they do the job properly.
I'm not sure if it's a good idea to buy a new one, but I'm sure it's a good idea to buy a new one, because it's a good idea to buy a new one.
16Gb mounted on an ASUS TUF Z270 MARK 1 motherboard, with i7 7700k, they do their job !
nothing to say, it's solid !!!!
PS: Think to activate the XMP in the bios of your motherboard to benefit from your 2400MhZ
Good bars not too expensive. The 2400 CL14 is a very good latency without heating up. The bars are low enough to fit the vast majority of Ventirads including my Dark Rock 3. I recommend these bars!
I doubled the one I had of the same series, I went to 32 GB. Excellent.
The first two installed in an LDLC workshop, as well as the installation of the whole PC.
Very well done by the installer and with very good advice given to me.
Mounted on a CM with only two ram slots. And 16 gigs gives you some time before you think about doubling the stake ;)
Clean packaging, aesthetically sober and well made. Don't forget to activate the XMP to enjoy your 2400MhZ :)
I have had this product since my first pc and have had no problems with it. The installation went without a hitch, the bars are solid and look good. The RAM was recognised straight away on the first boot.
Nothing to complain about, automatically recognized. No compatibility issues with a GIGAByte GA-B250M-D3H and an Intel Core i7-7700 processor. The motherboard detects the speed well.
Ordered to be married to a core i5 6600 via a Gigabyte GA-Z170-Gaming K3-EU, I am completely satisfied.
With Windows 10, I have no problems with the amount of memory, nor with throughput. Everything remains fluid, whether in video games (Warframe, GTA V,...) or in video editing (Premiere, AE,...)
In short, a perfect amount of RAM for my use, from a brand that guarantees quality.
On my order from the site, the packaging and my invoice I read 2400MHz.
In the bios and the bone 2133MHz ? look for the mistake ? some smart guy stuck the wrong label on the box ?!
I think I've been fooled on this one, to see what ldlc offers me?
The brand inspires confidence, aesthetically cool, they do their job at the performance level, combined on a motherboard Z170k, i7 6700K, gtx 1070, ssd samsung 850 evo, nothing to complain about, I strongly recommend
CL 14, 2400mhz, 16gb, Corsair brand what could be better?
More than enough performance for future needs, the carbon style design is top notch installed like many on an i7 6700k and a maximus hero VIII
To buy with eyes closed.
Very good performance for a good price
Used on azus z170 A card and I5 6600k ssd Samsung 950 pro, perfect functioning, no problem to report.
Product performs well and is fast
To advise
Ram used with an i7 6700k and a msi z170 a pro
Good performance and fits my ventirad in size. I like the different colours available which allows me to make a red and a black bar to have a gaming style.
1 out of 2 clips that break after 3 months of use without an OC. Let's go for an RMA request hoping to avoid the endless negotiations where you try to justify your good faith...
Wait & See.
Used with i7 6700K and ASUS MAXIMUS VIII Ranger motherboard. Works perfectly.
The performance is great!
Very interesting price for 16 GB DDR4.
Very interesting site to recommend
Mounted on an MSI Z170A Krait GAMING with an Intel Core i5-6500 (3.2 GHz).
The performance is great !
Very interesting price for 16 GB of DDR4.
As always LDLC service is impeccable!
Ordered with ease from the website... received quickly by post... installed on an LDLC machine... works perfectly!
Just have to have Windows seven Pro to have the 32go if you upgrade
Very good memory strip, works great and doesn't take up any space on the motherboard.
I've got 32GB mounted on a Gigabyte G1.Sniper B7 with an I5-6600 and an SSD, it's a life-changer compared to the old setup.
Very good quality/price ratio.
Mounted on an Asus H170 Pro Gaming with a Noctua NH-U9B SE2, it fits perfectly thanks to the low profile.
A memory kit that I would recommend to anyone who wants 16GB of RAM without breaking the bank.
Here is a kit with an excellent quality/price ratio (even unbeatable).
Mounted on an MSI Z170M with an Intel i7-6700, it's a pleasure. It doesn't flinch. I like the low-profile with my Noctua NH-D14, it goes on by itself. Even though I've opted for watercooling now.
To buy with my eyes closed.
