Pictures may differ from actual products
Bambu Lab X2D
3D printer with 1 PLA / ABS / PETG / PVA / ASA print head - (Wi-Fi/USB) - Windows/Mac
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
779€95In stock -
999€95In stock
A new freedom for complex prints
Designed to easily produce parts with advanced geometries, the Bambu Lab X2D combines a generous print volume of up to 256 x 256 x 260 mm with a dual-nozzle extrusion system. The main nozzle creates the model, while the auxiliary nozzle can deposit a different material, particularly to create supports that detach cleanly and preserve surface quality. Thanks to its enclosed chamber heated up to 65 °C, its nozzle reaching 300 °C and its intelligent thermal management, the X2D can actively cool the environment to successfully print PLA bridges and overhangs, as well as maintain a high temperature to limit warping of technical materials. It thus combines versatility, ease of use and professional quality in a machine designed to produce rather than multiply adjustments.
Two complementary extruders for uncompromising printing
The architecture of the X2D combines two extrusion modes within a single head. The main extruder with direct drive offers a short filament path, beneficial for precision and broad material compatibility. The auxiliary extruder, installed at the rear of the printer and connected to the head by a PTFE tube, uses a Bowden configuration with a drive force suited to its longer path. Switching from one nozzle to the other relies on a fully mechanical mechanism, with no additional motor on the head. This keeps the head lightweight and limits inertia, vibrations and maintenance risks. Tested over more than one million switches, this system enables rapid alternation between the main material, support material or colors, while reducing purging and filament waste.
Smart technologies for consistent quality
The X2D incorporates the control technologies developed by Bambu Lab to automate the most sensitive operations. Bambu Dynamic Flow Calibration analyzes the behavior of the direct-drive extrusion motor, hotend, nozzle and filament before each print to compensate for flow variations. Its proprietary PMSM servo motor, capable of sampling torque and position 20 000 times per second, can detect a feed anomaly or clog at an early stage. No fewer than 31 sensors monitor the filament path, the thermal environment and the machine’s safety status. The three-stage filtration also helps purify the discharged air, while the optional vision encoder brings motion precision into the 50-micron category. All this operates with an announced noise level below 50 dB.
Main features:
- Technology: Fused Deposition Modeling (FDM)
- Print volume: 256 x 256 x 260 mm
- Print speed: 1000 mm/s
- Acceleration: =20 000 mm/s
- Included nozzle: 0.4 mm
- Supported nozzle diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament diameter: 1.75 mm
- Maximum nozzle temperature: 300°C
- Maximum build plate temperature: 120°C
- Extrusion motor: High-precision permanent magnet synchronous motor from Bambu Lab
- Pre-filter class: G3
- HEPA filter class: H12
- Activated carbon filter type: Granulated coconut shell
- Integrated camera: 1920 x 1080
- Control screen: Touchscreen, color, 5 inches
- Memory: Integrated 8 GB EMMC and USB port
- Wireless network: Dual-band Wi-Fi
- Compatible software: Bambu Studio, supports third-party slicing software that exports standard G-code, such as Super Slicer, PrusaSlicer and Cura
- Supported filaments: PLA, PETG, ABS, ASA, TPU
- Dimensions: 392 x 406 x 478 mm
- Weight: 16.25 Kg
Select your criteria
General information |
Product name |
Bambu Lab X2D |
Brand |
Bambu Lab | |
Model |
PF004-P | |
Technical specifications |
3D printer type |
Filament |
Interface with the computer |
Wi-Fi | |
| USB | ||
Print head(s) |
1 print head | |
Printing speed |
1000 mm/sec | |
Consumable material(s) |
ABS | |
| PETG | ||
| PLA | ||
| TPU | ||
| PVA | ||
Number of simultaneous colors |
1 | |
Number of color(s) |
1 | |
Nozzle diameter |
0.4 mm | |
Nozzle temperature |
300 °C (Degree Celsius) | |
Heated bed |
Yes | |
Bed temperature |
120 °C (Degree Celsius) | |
3D filament diameter |
1.75mm | |
Layer thickness |
100 Micron | |
Supported OS |
Mac OS X | |
| Linux | ||
| Microsoft Windows | ||
Physical characteristics |
Height |
478 mm |
Width |
392 cm | |
Depth |
406 cm | |
Weight |
16.25 kg | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
|
See all Bambu Lab products
Product referenced on 28 Aug 2026
For the moment, there are no customer reviews.Write a review
