Pictures may differ from actual products
The ARCTIC P12 Pro fan is designed to provide efficient and discreet cooling, even in environments with high air resistance. With speeds of up to 3000 RPM and a static pressure of 6.9 mmH2O, it ensures optimum airflow through radiators, perforated panels and mesh filters. Its maximum airflow of 77 CFM ensures high-performance heat dissipation, ideal for gaming configurations and intensive workstations.
Equipped with a hydrodynamic bearing (Fluid Dynamic Bearing) and an elongated shaft, the P12 Pro minimises vibrations and ensures silent operation, with a noise level of just 25 dB(A). This advanced design also extends the life of the fan, backed by a 6-year manufacturer's warranty.
The fan incorporates a state-of-the-art microcontroller that reduces motor noise, compensates for load fluctuations and protects against inrush currents and reverse polarity. In addition, an automated balancing process ensures exceptional accuracy and smooth performance by applying the balancing compound with extreme precision.
Thanks to its 4-pin PWM connector, the P12 Pro offers precise speed control, enabling dynamic adaptation to cooling requirements while maintaining minimal noise levels. With dimensions of 120 x 120 x 25 mm and a weight of 183 g, it fits easily into most PC cases, offering a reliable, high-performance cooling solution.
Select your criteria
General information |
Product name |
Arctic P12 Pro (Black) |
Brand |
Arctic | |
Model |
ACFAN00305A | |
Technical specifications |
Use |
Case |
Color |
Black | |
Luminous |
No | |
Connector(s) |
4-pin Female | |
Reverse (inverted blades) |
No | |
PWM |
Yes | |
Heat Pipe |
No | |
Cooling type |
Active (fansink) | |
Fan diameter |
120 mm | |
Minimum rotation speed |
600 RPM | |
Maximum rotation speed |
3000 RPM | |
Max airflow |
77 CFM | |
Pressure |
6.9 mm/H2O | |
Weight |
183 g | |
Use |
Office | |
| Gaming | ||
| Multimedia | ||
Bundle |
No | |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
|
|
Safety Information |
Responsible person |
ARCTIC GmbH |
Postal address |
Bevenroder Straße 149, 38108 Braunschweig, Germany | |
Electronic Address |
info@arctic.de |
See all Arctic products
Product referenced on 8 Jul 2025
Inexpensive, great cooling, stylish, easy to install (screws included) I simply added 3 exhaust fans to my fractal case in addition to two on the front (two on the top and one on the rear) and the cooling is perfect
I bought them to replace the original fans in my case and my 240 mm AIO CPU Watercooling.
What I can say is that the full-load temperature (under OCCT) of my Amd Ryzen 7 9800x3d went from 93°C to 87°C. That’s great. In these conditions you can’t expect silence; efficiency is what matters.
For them to be quiet at idle, I made sure they run at around 1500 RPM for the case ones and 1700 for the ones on the CPU side. Be careful not to lower this setting too much, because your old-school hard drives could be affected by the case’s ambient temperature if they are in a slot that’s too confined.
My bad setting made my drives go over 50°C, which was far too hot.
Unbeatable value for money. It's quiet, a real pleasure, and it blows enough to be truly effective. The cable is a bit short, be careful for large machines or plan an extension cord.
These fans replace three original fans in a Phanteks P400A case intake.
They pack a punch.
Perfect for sending cool air into your case.
CPU (9800X3D): 70°C during gaming
GPU (RX9070XT undervolt): 75°C (hotspot) and 80°C (VRAM) during gaming
They are equipped with chain cables for RGB and power supply. Very practical.
However, they are noisy in towers. Make sure you set them up properly (under fan control, for example) and you won't even notice them.
The RGB looks great.
what can I say ??? there's nothing to say LDLC equipment always as professional welcome and product information excellent hence my 5 star rating
In the same universe: fans | lian li uni fan tl wireless lufter, argb, pwm - reverse blade, 120 mm, black | p12 pro | arctic p12
