Very practical
Bought at the same time as the 4x2.5Gb + 2xSFP+ 10Gb switch from the same brand, it does the job perfectly without the hassle of Gbic and LC cable.
Plug it in and it works!
Immediately recognized by an Intel 82599 network card.
Select your criteria
General information |
Product name |
TEXTORM Direct-Attach (DAC) SFP+ 10G Cable - 2 M |
Brand |
Textorm | |
Model |
DAC10G2M-CV | |
Technical specifications |
Product type |
Cable |
Warranties |
Commercial warranty |
Seller 2 years
|
Legal warranty |
See terms & conditions
Harmonised legal guarantee notice
|
|
Safety Information |
Responsible person |
Textorm |
Postal address |
2 rue des Erables CS21035 69578 Limonest Cedex France | |
Electronic Address |
support@textorm.com |
See all Textorm products
Product referenced on 21 Nov 2023
Bought at the same time as the 4x2.5Gb + 2xSFP+ 10Gb switch from the same brand, it does the job perfectly without the hassle of Gbic and LC cable.
Plug it in and it works!
Immediately recognized by an Intel 82599 network card.
Connects a Freebox Delta to a Mikrotik R5009 router. Immediately recognised by both devices as a 10G connection (I did not measure the actual connection speed), whereas the TP-Link FESTA FR365 router did not recognise it (incompatibility with the cable or the Freebox?). No gain in download speed (930 Mbps) but 100 Mbps gained in upload speed (850 Mbps vs. 750 Mbps), bearing in mind that the rest of the installation is standard copper.
NB: be careful with the length: the connector is very long and the cable is relatively rigid. The 50 cm cable I originally ordered was not long enough to connect the rear output of the Freebox to the front input of the switch.
Cable works well. Connected to a Freebox Ultra and a switch to take advantage of the Freebox's 10Gbs SFP+ port.
It achieves its 10Gbits targets without any problems and also looks very well made.
This dac cable is not fully compatible with the netgear xs508m switch.
If you start the switch with the cable plugged in, the switch remains stuck on its test, no port is available.
If you plug in the cable once the switch has booted up, it works.
In the same universe: cable sfp+
Trending now: Switch cable | Switch RJ45 converter | Switch PoE injector | Switch SFP module