Satisfied
Good value for money. Easy to install and fairly robust. You can adjust the height and depth of the monitor and rotate it.
Good value for money. Easy to install and fairly robust. You can adjust the height and depth of the monitor and rotate it.
Exactly what I needed for my 24" screen.
Be careful not to mount it on a thick desk, otherwise the stability of the stand is affected. Super fast shipping from LDLC. Thank you so much!
Good product, good start-up, installation manual with QR code and well explained. Good quality product.
Very easy to attach. It's my first one, I've got two left hands, and I fitted it with no problem. You just have to take your time and follow the instructions. Did the job, and saved me a lot of space on my desk by allowing me to move the screen back.
Easy to assemble, solid quality, can be adjusted for hardness of tilt. Left and right tilt a bit difficult, otherwise nothing to complain about.
The arm is simple and very easy to assemble. I only used the foot because I put the arm of the artic z1 that I already had and whose foot was damaged.
Very happy with the stand for a 24" screen. Adjustable as desired.
The only drawback is that you need a tool (supplied with the stand) to change the height of the screen.
I recommend it!
I was a bit worried that it would be too flimsy but it holds my 27" Lenovo screen perfectly. So practical and not overly expensive. I recommend it.
Easy to assemble and set up. Also very easy to attach the screen.
The only regret is that the arm tends to bend over when the screen is large. I had to remove the 27" screen and put the 24" screen in its place.
I was able to save a lot of space on my desk, assembly is easy, and there are plenty of adjustments possible, including the hardness of the joints.
The screen tilt adjustment is too soft to lower the screen and too hard to raise it. You can barely press the top of the screen down, but you have to really force it up. If I tighten the joint, it will be harder to raise it, and if I loosen it, the screen will tilt down under its own weight.
Once adjusted, it doesn't fall down by itself and everything is perfect!
I recommend it!
The pluses:
+ it is well built, solid
+ once the arm is adjusted (there are several adjustment points), the screen does not move, the arm remains well fixed
+ the screen can also be rotated to put it in a vertical position
+ it is very easy and quick to install
+ the plastic accessories for cable management are a bonus
+ in its data sheet it says that the maximum size of a screen that can be installed on the stand is 32". Personally I recently installed a 34" ultra-wide screen (making sure the weight did not exceed) and there is no problem, with the right adjustments, the rear shell of the screen does not rub against the vertical metal part of the stand.
Minuses:
- I haven't found any at the moment, CLEAR
For a single screen, it does its job very well, you don't have to be afraid of the price and say it's not solid, it's solid enough and personally I'm very happy with it.
I bought this stand to save space and to be able to have documents in front of me while I type on the computer, and the contract is perfectly fulfilled. The installation is very simple and the whole thing is very stable
I was afraid of the distance I would need to set back because of the footprint of the stand, but by offsetting the stand, I can get my screen 10cm away from the wall, which is less than when it was on its stand.
Cheap, easy to install and does the job on my 27" screen. The arm joint is a bit stiff, but for a simple setup, it's not too problematic.
Quality product, mounts easily and the screen is secure in the chosen position.
My screen is an Acer Predator 27" 2K weighing 5.8kg and the stand fits perfectly.
There are plenty of screws included in the box for different types of VESA 75/100 mounts with different screw widths and depths, just choose the ones that fit your screen.
I'm taking off one star not for the product but for the delivery because I paid LDLC for an express delivery before 10am and I received it around 12-13pm and I almost didn't be there to receive the package.
Efficient, meets the need perfectly. Excellent value for money.
It's a pity that you need a key to tighten it. But as there is a place to store it, it's a bit of a detail.
Bought to deport an old 17' LCD screen. Obviously, it's strong enough for this screen. In addition, the articulated arm allows a lot of movement and rotation. Excellent quality, sturdy, with the little felt pens to avoid damaging the desk. Beware, to attach it to the desk/table, you clearly need a fairly solid desk (no honeycomb furniture).
This stand increases the space on your desk enormously and you only need one edge to fix it :) I agree with the comments that the cable attachments are not very nice nor very efficient. I would add that the stand lacks a bit of height if you are tall and the arm articulation is a bit strange, especially against a wall. Otherwise, after 8 months of use: very solid and does its job! - 24" screen
If I had known earlier about the comfort and ease of use of this stand, I would have bought it much earlier.
It's easy to assemble, solid and easily adjustable. I would have bought it with my eyes closed.
Buy to support my Pano Xl buy here, everything is perfect, maintains at the top!
A sure value
This articulated arm that I use with the LDLC 29" XL pano has changed my workflow, I can adjust my distance to the screen depending on what I am doing and what I want to do. I save a lot of space on the desk and can have enough height to have less neck pain.
It looks quite sturdy and is quite easy to adjust, although you will need to use the spanner supplied with it for every major adjustment.
Clearly, I really recommend getting this stand, even if it means buying a screen 40€ cheaper, the difference is well worth the cost.
I received the stand this morning and it was a real pain! The box says 15kg max and the screen is 13-43 so with a 34 it shouldn't be a problem.
The problem is that the screen was only tilting to the left. I thought that it must be the screw that allows to swivel that was not tightened. So I dismantled the whole thing so that in the end it wasn't a screw in the middle. No adjustment possible in fact.
Fortunately I'm a handyman and I have what it takes to make fiddles otherwise I was good to send it back.
Clearly there should be a screw in the middle so that we can tighten the bracket as we like and loosen it for people who want to rotate it.
In the end I had to drill the stand to add two screws on each side to prevent it from tipping over.
I think it's a manufacturing defect, but I wouldn't recommend this stand for the time being.
9/10 Simply a sick product that is ultra practical.
I use its functionality every day by moving the screen, very easy to install and set up too.
The only small default is that it can leave a trace on your white wall (I put a small foam to avoid it)
The stand is easy to assemble, fits my desk so perfect. The screws to attach to the screen are included and so are the keys needed to mount it. Everything is adjustable, it's very nice to have on the desk.
I highly recommend it!
I'm very pleased with the quality of the product and the price.
Everything is provided (screws and key). It is important to check the space under the desk if you have drawers, reinforcement, or other things that could hinder the installation of the leg where you want it. This is the third leg I've tried and it doesn't fit on the desk, although this one is the most suitable, I had to be clever to fix it to the desk.
Bought it to hang my second 24" monitor on a desk that was reduced in size.
The result is really good.
The installation is quite simple and quick.
Quality product, I mounted a 27" and the mounting is easy, many adjustments to find the right position.
I like the cable management system with clips.
The delivery was very fast and the product well packed.
Thanks to LDLC
Robust and as described. Good quality product. Easy to assemble and looks very solid. Screws for assembly with the monitor are included, as well as clips for cable management, which is very useful. Very accurate positioning and orientation. Good value for money and fast delivery.
Robust and as described.
Beware, however, that some screens have their VESA mounts placed very high on the back of the screen, which can cause the screen to be very low, even at the maximum height this stand offers. Please take this into consideration.
It's a great comfort for those long hours spent playing... I wanted to get the more advanced version with USB ports but in the end I'm quite satisfied with this one. I prefer the all black finish.
I'm very happy with the black finish and the range of adjustment despite my initial apprehensions.
The pluses:
+ The price
+ the product is solid.
+ the assembly is quick and easy.
The minuses :
- the bar is a bit short, with 10 cm more I would have given it its 5th star.
- the product would have benefited from having one or two extra wire guides on the vertical bar (but that's nitpicking).
I bought two stands like this to remove the existing stand and raise the two side monitors of my triple screen.
These were lower than the central monitor, and the central monitor had no height adjustment.
Now my desk looks super clean, too bad we can't post a picture in the reviews!
I highly recommend :)
For the price I didn't expect a good quality product, but the whole thing is very solid and well finished.
I'm not sure if it's a good product or not, but it's very solid and well finished.
It's a good idea to make sure that the screw that allows the screen to rotate is securely fastened, if the screen is heavy, the weight will cause the screen to fall forward.
This stand is really nice to use. It is very smooth and has a good price/quality ratio for a two section stand. It comes in a small box and you will have to assemble it before using it, which is not easy.
I'm very pleased with the quality of the product.
The screen mount is very sturdy with a very good price/performance ratio.
It's very easy to mount with a cable support that's easy to orientate, very rigid and easy to fix to the desk.
It is very easy to orientate, very rigid and easy to fix on the desk.
Arctic Z1 Basic
Quality screen mount, solid, robust and practical (a little less so when installed)
I'll take off one star for the short height of the bar (foot) and especially for the total lack of information about the dimensions of the different elements, which I think are important for this kind of item.
Even at the manufacturer's, I couldn't find all the dimensions.
I was a bit worried about the fixing, but no, it's perfect. I'm going to see if I can find the extension on top to put a second screen.
The only regret is that you can't adjust the height with a simple gesture. You have to unscrew the part fixed on the main axis if you want to raise it.
Good quality product. Easy to assemble.
For the price the product is more than correct with the fixing screws supplied, the possibility of having the Vesa 100 or 75, the cable guides...
I would take one star off for :
- If the arm is pulled a little too hard on the pole, it breaks.
- The pole is not long enough (currently mounted with a Samsung 28" LED screen - U28E590D - which has the Vesa attachment at the top and not in the middle like most screens. This means that when the pole is in its highest position, the height of the screen is 3 centimetres lower than if the screen was on its stand).
- The rotation is too soft and the clamp is not adjustable, so it can be a problem if the screen is rotated 180°.
The whole thing is easy to assemble and feels very solid. Screws for assembly with the monitor are included, as well as clips for routing cables. Very accurate positioning and orientation!
Solid and numerous adjustments to find the right position. A detail that is often forgotten: the arm is adjustable in height, which is not the case with arms that are fixed to a wall. This is what made me choose this one.
Another hidden detail: Made in China of course!
I'm very pleased with the quality of the product and the quality of the service. I'm very pleased with the quality of the product and the quality of the service.
The vesa mount gave me a bit of trouble as the screws supplied were either too short or too long but the small plastic cylinders (that I had to cut) supplied with it fill the gap.
I have mounted a 27" screen on it and the stand is quite adequate for either landscape or portrait.